Advertisement
Durrng stops, press until the PRGM (program) indicator lights up
before playing.
Press to program the selected group/track.
Press until the RND (random) indicator lights up before you start
playback.
Playback starts in random order.
Random Play ends when all tracks are played back.
. For MP3IWMA files Select a group number, then a track
number.
. For CD Select a track number.
or
OOOWN
Repeat steps 2 and 3 to program other tracks you want.
. If you try to program a 51 st track, "FULL" will appear.
~III
The tracks are played back in the programmed order.
G)
2
6
4
RESUME Play
When you stop the playback by one of the following operations, this System
stores the beginning of the stopped track on the disc.
- Pressing. once
- Changing the source
When you start playback again, playback starts from the stored position.
To clear the stored position, open the disc tray.
. When you clear the stored position and start playback, playback starts from the
beginning of the first track.
NOTE:
This function does not work in Program Play and Random Play.
2
~f11
G)
5
• Playing at Random-Random Play
Operations for Program Play (while not playing)
· To check the programmed contents, press
I• •
or~.
• To add tracks, repeat steps 2 and 3 above.
• To erase the last programmed track, press CANCEL.
· To erase the entire program, press and hold CANCEL for about 2 seconds.
• To exit from program play, press MODE.
- The stored program is kept.
• Programming the Playing Order-Program Play
Operations for Random Play
· To skip a track,
press~.
· To go back to the beginning of the current track, press
I••.
· To exit from random play, press MODE while playback is stopped.
Press repeatedly to specify the repeat mode as follows:
[REPTRK - REPGRP- REP ALL- REP OFF
J
REP TRK: Repeats the current (or specified) track.
[~1]
REP GRP: Repeats all tracks in the current group (MP3IWMA
only).[~]
REP ALL: Repeats all tracks.
[~
ALL]
REP OFF: Normal playback
NOTES:
• Ifno disc is inserted, "NO DISC appears on the main display
• IfMP]/WMA flies are not recorded on the disc, "NO PLAY" appears on the main
display
• Basic Disc Operations
To
Press
Indication/Result
Play back the disc
· Current track number and elapsed playing
time appear.
~III
For MP3/WMA files: Before current track
G)
number and elapsed playing time appear, the
tag information appears if it is recorded
• During playback, press again to pause.
Stop playback
CD
· While playback is stopped, total track number
and total playing time (for MP3IWMA files,
group number and track number) appear.
Select a track
~
Select the next tracks.
~
To go back to the beginning of the current or
previous tracks
Select a group
UP
Select the next groups while playback is
(MP3/WMA only)
0
stopped.
OOOWN
Select the prevIous groups while playback is
stopped.
Forward search/
~
Press and hold to fast-forward the track during
Reverse search
playback
To stop searching, release the button.
~
Press and hold to fast-reverse the track during
playback.
To stop searching, release the button.
• Playing Repeatedly-Repeat Play
1
8
Press to open the disc tray.
Press to close the disc tray
. When using an 8 cm disc, place it on the inner
circle of the disc tray.
..
g
The following operations are explained using the remote control, unless
mentioned otherwise. However, if the System has the same or similar button
names, they can also be used for the operations.
..
To cancel the prohibition, repeat the same procedure
'. I+Q)
2
"Playing Back a Disc
3
• Loading aDisc
(on the System only)
This System can play back...
-CD
- CD-R/CD-RW recorded in audio CD format (CD..DA) or recorded MP3/WMA files
in ISO 9660 format.
· When playing back an MP3 or WMA track, MP3 or WMA indicator lights up
1
• Prohibiting Disc Ejection
(on the System only)
You can lock the diSC tray so that no one can eject the loaded disc.
• This is possible while the System is on standby.
4
Advertisement
