Service Position; D1 Board Removal; J Board Removal - Sony FD Trinitron KV-28FX65B Service Manual

www.freeservicemanuals.info

2-4. Service Position

Position the PWB as indicated to access the solder side.
To gain access to the D Board follow the instructions on page
19. [Removal and Replacement of the main bracket bottom
plates ].

2-6. J Board Removal

Release the two metal bracket support clips located on either side of the chassis. Tilt the bracket very slightly away from the shield
case indicated. Release the J board board socket retaining clip and carefully lift the complete assembly vertically.
10/16/2012

2-5. D1 Board Removal

To remove the D1 Board release the clip circled and gently
remove the board in a vertical direction.
Clip
17
World of free manuals
www.nostatech.nl
Shield
case