DeWalt DCT416 Instruction Manual page 17

To Change the Tracking Setting
When the tracking feature is on, the imaging thermometer will locate
the hottest (red o) and coldest (blue o) spot in the displayed area. The
imaging thermometer can be moved to align the center measurement
spot (+) to the desired location.
NOTE: The displayed temperature always corresponds to the
center (+).
1. Press the menu/power button (L).
2. Press the forward (J) or back (H) arrow to highlight the tracking
option in the menu.
3. Press the select button (I) to confirm selection.
4. Press the forward (J) or back (H) arrow to turn on or off the
tracking feature.
5. Press the select button (I) to confirm the tracking feature setting.
6. After saving the tracking feature setting, the imaging thermometer
will automatically return to the main menu screen.
To Set Date and Time
1. Press the menu/power button (L).
2. Press the forward (J) or back (H) arrow to highlight the date and
time option in the menu.
3. Press the select button (I) to confirm selection.
4. Press the forward (J) or back (H) arrow to highlight the field to
change.
5. Press the select button (I) to activate the field. The field will turn
green.
6. Press the forward (J) or back (H) arrow to change the activated
field.
15