Page 2
ELECTRICAL INSTALLATION (115 Volt, 60 Hertz) Follow your electrical code in all details. In older houses with limited appears the circuit is heavily loaded, run a line directly to the main fuse box. 1. Remove the electrical access cover on the bearing bracket assembly.
Page 3
GENERAL INSTRUCTIONS. 1. In old houses, it is generally good practice to clean out the existing drain line from, sink sewer before installing DISPOSER. 2. The disposer can be installed in steel, monel, stainless steel or cast iron sinks. with a sink opening of 3-l/2”...
Page 4
WARNING This disposer must be properly before operating, by connecting ground terminal to a suitable plying with the National Electric local electrical codes. KitchenAid Division Troy, Ohio 45374 Form 12664A (4-78) grounded the chassis ground, com- Code and/or Printed U.S.A.
Need help?
Do you have a question about the KWC-200 and is the answer not in the manual?
Questions and answers