Advertisement

Quick Links

Instructions for the user

Warnings
24
CONTENTS
25
27
28
33
34
36
37
37
How to read the instruction book ?
The symbols bellow will guide you when reading
the instruction book
Safety instructions
Description of operations step by step
Advice and recommendation
Information environment protection
Safety
Specification nozzles
38
39
40
43
44

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi MI 85.52 LT

  • Page 1: Table Of Contents

    CONTENTS Instructions for the user Instructions for the installer Warnings Safety Description of the appliance Technical Features Use of the appliance Installation Advice for use Specification nozzles Maintenance and clening Oven lamp remplacement What to do if the appliance does not work Guarantee conditions After Sales Service...
  • Page 2 WARNINGS It is very important that this instruction book An intensive and prolonged use of the should be kept safety for future consultation. cooker could necessitate a supplementary If it should be sold or given to another airing by opening the window, or a more person, please ensure that the booklet goes effective ventilation...
  • Page 3 • Do not leave anything (cloths, aluminium foil, etc.) on the hob when using the Installation burners, • Always clean the cover before closing, • The work of installation must be carried • When the oven is in use the cover has to out by a qualified installer.
  • Page 4: Description Of The Appliance

    DESCRIPTION OF THE APPLIANCE Control panel ZANUSSI OVEN OVEN HOT PLATE TIMER 1. Oven light switch 6. Middle hot plate knob 2. Oven knob 7. Front right burner control knob 3. Back left burner control knob 8. Back right burner control knob 4.
  • Page 5: Use Of The Appliance

    USE OF APPLIANCE 1. GAS OVEN Before the first use ensure that the room is well ventilated: V.M.C. (Mechanic ventilation) or opened window How to proceed ? 1. Lift the lid 2. Remove the oven accessories 3. Detach the adhesive labels, the foil protection if there is 4.
  • Page 6 The oven can be used for traditional cooking. The symbol on the knob corresponds to the symbol on the control panel. “8” Maximum “1” Minimum Ignition 1. Open the oven door. 2. Lift the small lid on the bottom of the OVEN cavity, push and turn the control knob to the left to position 8 (fig.1), maintain...
  • Page 7 Light in the oven The oven is equipped with a lamp to allow of meals during cooking. It starts operating when the knob on the control panel is pressed (fig. 3) Mechanical timer fig. 3 The timer can be regulated for a maximum period of two hours.
  • Page 8 Extinguishing of burners Turn the knob clockwise to mark « ». The safety device is in place. Do not put on the hob things or food liable to melt. Do not allow children near the cooker when it is in use, for avoiding touch of hot surfaces, overturning of pots, Electric plate Depending on the cooking the knob for...
  • Page 9 Use advice • Never leave the plates on without a pan on them or put a material between the plate and the pot; • For saving power, it is advisable to cover the pot every time the recipe allows it; •...
  • Page 10: Advice For Use

    ADVICE FOR USE Oven cooking Influence of the pots on oven cooking • Turn off your oven 5 minutes before the results foreseen cooking time you will save You have to know that: power, the accumulated heat will allow • The aluminium, the terracotta pots to end cooking;...
  • Page 11: Maintenance And Cleaning

    MAINTENANCE AND CLEANING Before cleaning, check that the knobs are on “off” position, that the appliance has cooled completely and that it is disconnected. Never use abrasive powder or wire sponge for cleaning the appliance. Burners Clean the covers with warm water and mild detergent, remove all crust.
  • Page 12 Oven Enamelled parts: Same cleaning as other enamelled parts. Oven door cleaning For a complete cleaning of the oven door it is advisable to dismantle as follows: -open the door completely (fig. 9) -turn the two blocking parts on the hinges arms 60º.
  • Page 13: What To Do If The Appliance Does Not Work

    WHAT TO DO IF THE APPLIANCE DOES NOT WORK If the appliance does not work properly, check the following points before asking for service; there could be simple problems that you could remedy by yourself; if not, contact your after sales service.
  • Page 14: Guarantee Conditions

    GUARANTEE CONDITIONS abnominal power variation, etc., or non- Guarantee stipulated in the contract 1 year starting from setting into function the observing of the installation and use manufacturer will replace the damaged conditions stipulated in the Instruction book, wrong handling, negligence parts except the cases mentioned in chapter wrong, installation non-conforming to the...
  • Page 15: Instructions For The Installer

    INSTRUCTIONS FOR THE INSTALLER Electric connection ADVICE FOR SAFETY • Before installation ensure that the local Check that: distribution conditions (gas nature and • the power of the installation is enough; pressure) and the pre-setting of the • supplying lines good appliance are consistent;...
  • Page 16: Technical Features

    TECHNICAL FEATURES Free standing Classe 1 Cover Enamelled Pan support Enamelled Front right Rapid 2,6 kW Back right Semirapid 2,0 kW Front left Rapid 2,6 kW Back left Auxiliary 1,0 kW Middle Hot plate 1500 W Oven Oven Over burner power 3,2 kW Light in the oven Lamp 15W type E14...
  • Page 17: Installation

    INSTALLATION Placement Remove the plastic packaging and install the cooker in a dry, ventilated room (fig. 12) not near curtains, paper, alcohol, petrol, etc…) The appliance has to be set on a heatproof soil. This appliance belongs to class “1” in matters of protection against overheating of surrounding surfaces.
  • Page 18 Gas connection Your cooker is delivered adjusted for the kind of gas stated on the rating plate. It might be necessary to pass to another kind of gas, different to the one it is preset to. Under these circumstances follow the instructions bellow.
  • Page 19 Fuse capacity: 16A Note: Check on the rating plate the value for the total connection power for establishing the fuse power. In case of a direct connection to the mains you have to interpose an omnipolar switch a minimum opening between contacts of 3 The yellow-green grounding cable has not to be interrupted by the switch.
  • Page 20 Bottle installation • The length of the flexible pipe has to be • The connection of the regulator has to be fronted to the righr of the appliance. • It is MANDATORY to fix the pipe at the FOUR T ABLE GUIDE DE CUISSON T ABLE B GL 800...
  • Page 21: Oven Lamp Replacement

    OVEN LAMP REPLACEMENT Before replacing the lamp take care that all control knobs be on “off” position « ». Disconnect the appliance; watch that the oven be cool. This lamp of 15 W, convection E 14 (230/240V) is a special lamp for “higher” temperature, up to 300˚C.

Table of Contents