Using Canon Printer Agent Creator In Automatic Mode - Canon NDPS Gateway User Manual

Using Canon Printer Agent Creator in Automatic Mode

To use Canon Printer Agent Creator in Automatic mode, do the following procedure.
1
On the NetWare server console, enter the following command, and press the Enter key.
load canpautl
The [Mode Selection] menu appears.
2
Select [Automatic Mode], and then press the Enter key.
[Automatic Mode Main Menu] appears.
NOTE
• You can also display [Automatic Mode Main Menu]
by typing the following command from the NetWare
server console in step 1.
load canpautl automatic
3
Select [Settings], and then press the Enter key.
The [Settings] menu appears.
2-12 Using Canon Printer Agent Creator