Related Manuals for 3D Systems iSense
Summary of Contents for 3D Systems iSense
- Page 1 3D scanner Take your world from physical to digital with 3D scanning User Guide Original Instructions...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1 INTRODUCTION COPYRIGHT COMPLIANCE AND SAFETY 2 SCANNER SETUP WHAT'S INCLUDED ASSEMBLY INSTRUCTIONS DOWNLOAD THE ISENSE APPLICATION RUN THE ISENSE APP ACTIVATE YOUR SCANNER 3 HOW TO SCAN SCREEN NAVIGATION SCANNING BEST PRACTICES SCANNING PROCEDURE EDIT A SCAN... -
Page 3: Introduction
INTRODUCTION Thank you for purchasing the iSense 3D scanner. You can think of scanning as a sort of physical photography. By scanning a physical object, you can create a 3D digital model. Unlike traditional photography, however, you can use the digital model to return to the physical mode by sending the image to a 3D printer. -
Page 4: Scanner Setup
Unpack and set up your scanner and install the scanner app before you get started with the basics of scanning. WHAT'S INCLUDED The following image shows what’s included in the box, in addition to the iSense Quick Start Guide: NOTE: The iSense 3D scanner is approximately 50% charged upon delivery. -
Page 5: Download The Isense Application
RUN THE ISENSE APP When you installed the iSense app, a shortcut was created on your home screen. Use the shortcut to open the application. NOTE: If the scanner is not connected to your iPad, a message will state “Device Not Connected.” Plug the data cable into the scanner and into the iPad. -
Page 6: Activate Your Scanner
ACTIVATE YOUR SCANNER • If you have not linked your iSense 3D scanner to your Cubify account and have not received a 4-digit activation code, tap Get activa- tion code from Cubify.com. Log in to retrieve the code. NOTE: If you do not have a Cubify account, go to www.Cubify.com/isense. Tap... -
Page 7: How To Scan
Position your subject so that you have 360-degree clearance and can scan from all angles. SCANNING PROCEDURE Using the iSense 3D scanner, you can scan people or objects. 1. Select what to scan, a person or an object. -
Page 8: Edit A Scan
Tap Erase again to turn off the tool. ▪ The Solidify tool will make your scan print-ready by filling in all the holes and closing the model to make it solid. 3D Systems, Inc. -
Page 9: Help Menu
• Device Info - lists information about the battery, serial number, firmware revision, and hardware revision for your iPad. • Tutorial - shows on-screen tips for each step of the scanning process. • User Guide - displays a PDF of the iSense User Guide. 3D Systems, Inc. -
Page 10: Scanner Tips And Tricks
Use the following tips to get the most from your scanning experience: • Lighting ▪ Different lighting conditions can affect the quality of a scan. The iSense 3D scanner is designed for indoor use, and will work less than optimally in direct sunlight. -
Page 11: Scanner Settings
Specify any of the following settings during the editing process. • Color - toggles the display of color on the model. • Boundaries - toggles highlighting of the boundaries of your scan. EXPORT SETTINGS Specify the units of measure for exporting your scan. 3D Systems, Inc. -
Page 12: Features And Specifications
VGA [640(w) x 480(h) px] Color image size QVGA [320(w) x 240(h) px] Supported devices iPad Air, iPad Mini Retina, iPad 4th Generation Battery life 3-4 hours of active scanning; 1000+ hours of standby Warranty 1 year 3D Systems, Inc. - Page 13 3D Systems, Inc.
- Page 14 3D Systems, Inc. 333 Three D Systems Circle | Rock Hill, SC | 29730 www.3dsystems.com ©2014 3D Systems, Inc. All rights reserved. The 3D Systems logo, 3D Systems, Geomagic and iSense are registered trademarks of 3D Systems, Inc. pn 350316...
Need help?
Do you have a question about the iSense and is the answer not in the manual?
Questions and answers