Table of Contents | en Table of Contents Important Safety Instructions Customer Support and Service Installing the Fiber Optic Module Description Using an SFP Module Parts Included Installation Instructions Troubleshooting Bosch Security Systems, Inc. Installation Guide F.01U.134.924 | 1.0 | 2009.09...
Page 4
| Table of Contents Fiber Optic Media Converter F.01U.134.924 | 1.0 | 2009.09 Installation Guide Bosch Security Systems, Inc.
12. Install in accordance with the manufacturer's instructions in accordance with applicable local codes. Use only attachments/accessories specified by the manufacturer. Equipment change or modification could void the user's guarantee or authorization agreement. Bosch Security Systems, Inc. Installation Guide F.01U.134.924 | 1.0 | 2009.09...
Page 6
You can view and print the full version of this Installation Manual with Adobe Acrobat Reader. This user guide is the intellectual property of Bosch Security Systems; protected by copyright. F.01U.134.924 | 1.0 | 2009.09 Installation Guide...
Fiber Optic Media Converter Important Safety Instructions | en Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers Repair Center Telephone: 800-566-2283 Fax: 800-366-1329 E-mail: repair@us.bosch.com...
Page 8
| Important Safety Instructions Fiber Optic Media Converter Warranty and more information For additional information and warranty queries, please contact your Bosch Security Systems representative or visit our website at www.boschsecurity.com. F.01U.134.924 | 1.0 | 2009.09 Installation Guide Bosch Security Systems, Inc.
SFPSCKT Fiber Optic module into a VG4-A-PA1, VG4-A-PA2, VG4-A-PSU1 or a VG4-A-PSU2 AutoDome power supply box. Description The VG4-SFPSCKT is a unique media converter module for use with VG4 series AutoDomes incorporating the Ethernet (TCP/ IP) Communications Module. This media converter module is designed to accept any of the 10/100 Mbps Small Form-factor Pluggable (SFP) modules described below.
Using an SFP Module The SFP-23/SFP-24 modules and the SFP-25/SFP-26 modules are counterparts; if you use one in the VG4-SFPSCKT module then you must use the other in the CNFE2MC head-end unit. For example, SFP-25 is used in the VG4-SFPSCKT module installed into a VG4 power supply.
| Installing the Fiber Optic Module Fiber Optic Media Converter Installation Instructions Use the following instructions to install the VG4-SFPSCKT Fiber Optic module inside a VG4 Power Supply Box. Unpack the fiber optic module kit, and remove the parts from the bag.
Page 13
Figure 2.2 Insert standoff pin into power supply board Connect the supplied power harness (black) to the J103 socket on the power supply board, located below the Heater connector. Figure 2.3 J103 socket location Bosch Security Systems, Inc. Installation Guide F.01U.134.924 | 1.0 | 2009.09...
Page 14
Secure the base plate with the supplied screw in the lower left hole of the P105 connector. Figure 2.5 Attach base place to power supply box F.01U.134.924 | 1.0 | 2009.09 Installation Guide Bosch Security Systems, Inc.
Page 15
Fiber Optic Media Converter Installing the Fiber Optic Module | en Insert the SFP module into the VG4-SFPSCKT module: Note: The SFP module is static sensitive. Use static handling procedures when installing or removing the module. Ensure that the bale-clasp on the SFP module is up.
Page 16
14. Plug the fiber optic cable (LC or SC connector) into the SFP module inside the power supply unit. 15. Close and secure the power supply box when finished. 16. Restore the power to the power supply box. F.01U.134.924 | 1.0 | 2009.09 Installation Guide Bosch Security Systems, Inc.
Troubleshooting | en Troubleshooting Issue Symptom Resolution No data present No Power Check power to VG4-SFPSCKT: – If Green LED is present, then Check power to CNFE2MC: – If Power LED is Green, then check data link Invalid Fiber Link Check fiber connection to VG4- SFPSCKT: –...
Page 18
– If no LED lit on the RJ-45 connector, then there is a fault with this connector, the RJ-45 cable, or the cable is not connected to the VG4-SFPSCKT. F.01U.134.924 | 1.0 | 2009.09 Installation Guide Bosch Security Systems, Inc.