Universal Repeater Mode - Tenda 11N Broadband Wireless Router User Manual

Click Advanced>Status and the connection status displays Connected.
7.
Note
When the settings finished, remember to enter Internet Connection Setup to
1.
set up Internet connection.
Verify that the SSID, channel, and security mode on the page match those of
2.
the added wireless network. If not, manually correct them.
For the normal wireless connection between two routers, do not change this
3.
router's SSID settings, including SSID, channel, security mode and security
key.

Universal Repeater Mode

In this mode, the router will relay data to an associated root AP and AP function
is enabled meanwhile. The wireless repeater relays signal between its stations
and the root AP for greater wireless range. Steps are shown as below:
Click Wireless>Wireless Extender, select Universal Repeater in the
1.
11N Broadband Wireless Router
.
34