4. Mechanical Instruction
4.1
Disassembling / Re-asssembling
4.1.1
Disassembling & Re-assembling of FPC (Flexible Printed Circuit) and Y-Buffer (Upper and Lower)
1. Removal procedure
•
Pull out the FPC from Connector by holding the lead of the
FPC with both hands.
2. Assembling procedures
•
Push the lead of FPC with same force on both sides into
the connector.
Notice: Be careful do not get a damage on the connector pin
during connecting by mistake.
4.1.2
Assembling & Disassembling of Flat Cable Connector of X-main Board
1. Disassembling Procedure
•
Pull out the clamp of connector.
•
Pull Flat cable out press down lightly.
•
Turn the Flat cable reversely.
Mechanical Instruction
S/SD/HD 3.1 PDP
4.
EN 9