Table of Contents
Advertisement
ST-1
TROUBLESHOOTING
Fault
Code Fault Description
Low battery
1
warning only
(no fault generated)
Battery voltage
2
is too low
Battery voltage
3
is too high
Time out for
4
maximum current
5
Park brake fault
Speed pot neutral
6
fault
7
Speed pot error
8
Motor error
9
Other errors
Possible Causes / Corrections
The battery needs
to be charged.
The battery must
be recharged.
The battery is over charged.
The speed is too high when
driving down a slope.
The motor is stalled.
The controller outputs the
maximum current for more than
15sec.
Check if park brake is released.
Engage park brake to normal
drive position and restart
the scooter.
Check park brake connection
Calibrate speed pot neutral.
Check speed pot connection.
Check motor connection.
Internal error. The controller
needs to be serviced if the
problem persists after switching
off and on the controller.
12
Issue 1
02/04/2010
Instruction Booklet
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Strider ST-1 and is the answer not in the manual?
Questions and answers
Red amber green and blue light on all the time on my days strider st1 is it meant to be like this
No, it is not normal. The green light indicates a fully charged battery. If there is no green light, the batteries need charging. A flashing self-diagnostic warning light indicates a problem. Continuous lights of all colors are not described as standard operation and may indicate a malfunction.
This answer is automatically generated
@Mr. Anderson
I don't have any flashing ligjts
The flashing light on the Days Strider ST-1 is a self-diagnostic warning light. If it is not working, it may indicate a malfunction in the warning light system itself or a lack of power. Check the battery gauge to ensure the battery is charged, as no green light means no power. If the battery is charged and the light still does not flash when there is a problem, the light component or related circuitry may be faulty.
This answer is automatically generated