Gold Century GC-1023 Owner's Manual
  1. Manuals
  2. Brands
  3. Gold Century Manuals
  4. Metal Detector
  5. GC-1023
  6. Owner's manual

Gold Century GC-1023 Owner's Manual

Discriminating pin pointing metal detector
Hide thumbs

Advertisement

Table of Contents

Gold Century
GC-1023 Metal Detector
Discriminating Pin Pointing Metal Detector
OWNER'S MANUAL
And
Warranty

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GC-1023 and is the answer not in the manual?

Questions and answers

Related Manuals for Gold Century GC-1023

Summary of Contents for Gold Century GC-1023

  • Page 1 Gold Century GC-1023 Metal Detector Discriminating Pin Pointing Metal Detector OWNER’S MANUAL Warranty...
  • Page 2 With your GC-1023 metal detector, you can hunt for coins, relics, jewelry, gold, and silver just about anywhere, including lawns, snows, mountains and etc. The detector is versatile and easy to use. Four operating modes: DISCRIMINATION --- in this mode, the unit comes with auto ground balance.

  • Page 3: Assembling The Detector

    and prolong the battery life. PREPARATION ASSEMBLING THE DETECTOR Assembling your detector is easy and requires no special tools. Just follow these steps: 1. Insert the latch on the liner into the assembly hole on the bottom of the control box.

  • Page 4: Installing The Batteries

    4. Rotate the stem’s lock nut clockwise to loosen it. 5. Stand and stretch your arm, holding the metal detector to make the search coil above the ground for about 1/2 inches to 2 inches. Rotate the stem’s lock nut counterclockwise to tighten it.

  • Page 5: Using Headphones

    Warning: Dispose old batteries promptly and properly. Never bury or burn them. USING HEADPHONES 1. Insert the headphones’ 3.5mm plug into the HEADPHONE jack. At this time the internal speaker is disconnected. 2. The unit does not have volume control. So it’s better to use headphone with volume control.

  • Page 6: Mode Switch

    VIEW Meter—when the metal target is found, the meter will swings to the right. 4. Operation Your GC-1023 has four operation modes: DISC,TONE ,ALL METAL and TARGET. DISC, TONE and ALL METAL are motion modes. You have to move the coil to...
  • Page 7 search for target. While TARGET is a non-motion mode. When searching, generally set operation mode to ALL METAL and SENS to less 10. Sweep your search coil as following picture, move the search coil right and left in an arc line. For not missing any target, it is better to keep the distance from search coil to the ground about 1 –...
  • Page 8 short, long or silence. Set the DISC mode switch to “0”. Slowly rotate the control clockwise to high position to reject objects you don’t want. At different DISC position, unit can reject different undesired objects. When DISC/TONE is set to 0, unit will respond to any metal object with a long tone;...

  • Page 9: Care And Maintenance

    trashy iron. Move away any metal digging tool when searching. In “TARGET ” mode, the unit can detect any type of metal. So it is very likely to meet interference, if you search for small target near a large metal. In this case, you can remove the large metal away or abandon this searching area.
  • Page 10 Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the detector. Gold Century Warranty This product is warranted against defects in materials and workmanship for 1 year from date of purchase. The item must be shipped at buyer’s expense to our offices where we will, at our discretion, repair or replace it free of charge.

Table of Contents