Table of Contents
Advertisement
Advertisement
Chapters
Table of Contents
Summary of Contents for Nolan n-com bluetooth kit 2.1
- Page 1 SAFETY AND INSTRUCTIONS FOR USE...
-
Page 2: Table Of Contents
The system can be expanded by means of the Intercom Wire accessory, which allows interphone communication via cable with a Nolan N-Com helmet equipped with Basic Kit. If both helmets are equipped with an N-Com Bluetooth Kit, in addition to connection with a Bluetooth cell phone, communication between the two helmets is also possible in wireless interphone mode. -
Page 3: Warnings And Safety
WARNINGS AND SAFETY Read this User Manual carefully, as well as the User Manuals for other N-Com kits that you will be using with the N-Com Bluetooth Kit2. Read the simple rules listed below. Failure to comply with these rules may lead to dangerous situations. -
Page 4: Appropriate Use
1.7. Accessories and batteries • Only use the type of batteries, battery chargers and accessories approved by Nolan for the specific model. • The use of a battery type different from the recommended one may lead to dangerous situations and invalidate the warranty. -
Page 5: Content Of The Packaging
2. CONTENT OF THE PACKAGING The N-Com Bluetooth Kit2 package contains: e-box Bluetooth2 Battery charger Multimedia Wire2 Rechargeable battery e-box safety block... -
Page 6: Installation
3. INSTALLATION YOU CAN DOWNLOAD THE VIDEO INSTRUCTIONS FROM THE WEBSITE http://www.n-com.it/en/n- com/downloads.html Warning: In order to use the N-Com Bluetooth Kit2 system, the Nolan helmet must be equipped with the Basic Kit (or Basic Kit2), sold separately. N.B.: Before using the N-Com Bluetooth Kit2 system, the battery must be installed and recharged (see chapter 13) Fig. - Page 7 Fig. 4 Fig. 5 • Position the battery in the special slot on the Basic Kit (see specific instructions for the Basic Kit). • Position the e-box in the relevant housing (Fig. 4). First insert the front part, then press down on the e-box until both hooks fully click (Fig.
-
Page 8: Basic Functions
4. BASIC FUNCTIONS All the functions offered by the N-Com system are activated by using 3 buttons, “ ”, “on” and “ ”. Every command is confirmed by a special beep, which varies depending on the requested function. This way you can use all the functions with the helmet raised. -
Page 9: Affiliation Reset Function
Turn off both the cell phone and the Bluetooth Kit2 system, then turn them both on again in order to save the affiliation data N.B.: If the Bluetooth Kit2 device does not connect automatically the next time it is turned on, perform the first connection from the cell phone, selecting the N-Com device from the list and pressing “Connect”. -
Page 10: Interphone Via Cable
Bluetooth Kit system versions prior to version 2.1 only allow this use with significantly shorter ranges. N.B.: The Bluetooth kit2 system is also compatible with a Nolan helmet equipped with Bluetooth kit, Bluetooth kit2, Bluetooth Kit X-Series or Bluetooth Kit MULTI. -
Page 11: Interphone Functions Via Bluetooth
N.B.: In case a cell phone was already affiliated prior to the affiliation of the Bluetooth Kit systems, make sure that this affiliation is still working. Otherwise, repeat the affiliation with the cell phone. All affiliations are stored even when the helmets are turned off, and they are maintained until the helmets are turned back on. -
Page 12: Operation Of A2Dp Receiver + Interphone12
(audio in Mono mode), 9. SATELLITE NAVIGATORS Nolan’s N-Com communication system is compatible with the most popular satellite navigators for motorcycles. Connection with a satellite navigator can occur via cable (through the special Multimedia Wire) or via Bluetooth. -
Page 13: Connection To Other Audio Peripherals
You can listen in Stereo mode with the following configurations: • Bluetooth kit2 + Basic Kit2 + Multimedia Wire2 • Bluetooth kit2 + Basic Kit2 + Bluetooth receiver equipped with A2DP protocol. In all other configurations, listening will be in mono mode. A second helmet connected in interphone mode via cable or Bluetooth will be able to hear the audio coming from the pilot in mono mode. -
Page 14: Summary Diagram Of Commands14
12. SUMMARY DIAGRAM OF COMMANDS Button >2 Pressure Brief Brief Brief Brief Turning on Turning off Raising the Volume Lowering the Volume Answering a call Vocal call Hanging up/Rejecting a call Cell phone connection (HFP profile) Calling last number dialed Hanging up the cell phone (HFP profile) Call transfer (HFP... -
Page 15: Battery
Button >2 Pressure Brief Brief Brief Brief Affiliation mode /setting Interphone affiliation (system in affiliation mode) Erase affiliations (RESET) (system in affiliation mode) Preselección cable Mono (sistema en modo acoplamiento) 13. BATTERY 13.1. Installing the battery The battery is installed in the Basic Kit. Please refer to the Basic Kit instructions specific for your helmet in order to properly install the battery. -
Page 16: Maintenance
N-Com systems or between the N-Com systems and other devices. k) Since Nolan® does not supply the system on which the cell phones work, it shall not be responsible for the operation, availability, coverage, services or range pertaining to the aforementioned system. -
Page 17: Validity Of This Limited Warranty
This warranty is valid throughout the European territory, and it represents the only express warranty provided by Nolan® in relation to the sale of its own products. This warranty does not affect the rights to which the buyer is entitled and which are expressly provided for by Directive 1999/44/CE.
Need help?
Do you have a question about the n-com bluetooth kit 2.1 and is the answer not in the manual?
Questions and answers