Troubleshooting - Ryman cc12 Instruction Manual

TROUBLE SHOOTING
Troubles
Reason
Solution
Shredder does
not
work after
paper inserted.
1.
The power cord may
not be
properly connected.
2.
The paper being shredded
may
be too thin to activate the
sensor.
3.
The motor has been over
heated.
4. The paper feed may
be
jammed.
5. Shredder head is not
placed properly on
basket.
1.
Check the power cord is correctly
plugged
in
both the plug socket and the
shredder.
2.Try
a
thicker paper
or
fold the paper
in
half
&
try again.
3.
Wait for about 30 minutes and
try
the
shredder again.
4.
Reverse the
paperfeed
and remove
any
jammed paper, then try again.
5. Place shredder head securely
on
basket, facing the front correctly, ensuring
contact with the basket is
made.
Shredder does
not stop after
shredding
has
finished
1.
The mechanical sensor
may
be
jammed by paper
1.
Clean the paper entry and try
again.
Shredder
makes a
high
noise
1.
The shredder may not
be
placed
on a flaUstable
surface.
1. Place the shredder onto
a
flat/stable
surface.
Shredder does
not
shred paper
1.
Too much paper
is
inserted.
2.
The paper size inserted
may be larger than the paper
entry.
3.
The paper may be
inclined
when placed
into
the paper
entrv.
1. Check to see
ifyou
have exceeded the
rated capacity of paper
(5 sheets of
80gsm).
2.
Reverse the shredder and take
out
the
paper, fold
in
half and try again.
3. Re-insert the paper vertically.