Table of Contents
Advertisement
Initialization (Password, Card, Key-Tag)
(1) Password Known
Open the battery cover in the
Enter the password.
interior unit and press and
hold the registration button for
approximately ten seconds.
Beep
Beep, Beep
Beep, Beep, Beep, Beep
(2) Password Unknown
Open the battery cover in the
Enter the code
interior unit and press and
'4560852580'.
hold the registration button for
approximately ten seconds.
Beep
Beep, Beep
Beep, Beep, Beep, Beep
1
Press the
(star)
button.
Beep, Beep, Beep,
Beep ( )
CAUTION
Initialization results in the deletion
of all registration information,
and the password is automatically
set to '1234'.
Press the
(star)
button.
After selecting initialization,
please wait until the light turns
Beep, Beep, Beep,
off. The memory clearing process
Beep ( )
requires some time.
Registration (Modification) & Deletion
1. Password
1) Registration (Modification) Method
The password is used with the exterior keypad to release the door lock.
The password can be any single number of 4 ~ 12 digits in length.
Input the previously registered
Open the battery cover
password, and then press the
in the interior unit and
(star) button. (If operating
press the registration
for the first time, the default
button once.
password is '1234'.)
Beep, Beep, Beep, Beep
Beep
( ) + Beep, Beep
CAUTION
Original factory settings set the password to '1234'. For complete safety, clear all registration first, and then program and use a new password.
(Refer to Initialization, P. 14)
Be careful not to reveal an active password to others.
Using the same password over a long period of time raise the issue of disclosure. It is recommended that passwords be changed on a periodic basis.
Input the new password
To complete registration,
for registration, and then
input the new password
press the
(star) button.
once again, and then press
the
(star) button.
Beep, Beep
Beep, Beep, Beep, Beep ( )
1
Hide quick links:
Advertisement
Table of Contents
