Table of Contents
Advertisement
PRODUCT DATA
MODEL
WEIGHT
NOMINAL HEAT OUTPUT
SERIEL NO. _________________________
FB
50KG
4KWs
CONTENTS
Lighting the fire
Firebox linings and baffle
Wood burning tips & theory
Cleaning and Maintenance
Installation INSTRUCTIONS
Positioning and Clearances
Chimney
Flue connection
Problem solving
Wood chart
Lee Bridge Ind. Est., Halifax, HX3 5HE, UK
www.firebellystoves.com mail@firebellystoves.com
2
2
2
3
3
4
4
4
5
5
7
Advertisement
Table of Contents
Related Manuals for Firebelly FB
Summary of Contents for Firebelly FB
- Page 1 PRODUCT DATA MODEL WEIGHT 50KG NOMINAL HEAT OUTPUT 4KWs SERIEL NO. _________________________ CONTENTS OPERATING INSTRUCTIONS Lighting the fire Firebox linings and baffle Wood burning tips & theory Running temperatures Cleaning and Maintenance INSTALLATION INSTRUCTIONS Building regulations Positioning and Clearances Chimney Flue connection Problem solving Wood chart...
-
Page 2: Operating Instructions
Operating Instructions Building regulations Installation of the Firebelly woodburning stove must comply with all local building regulations, including those referring to national and European standards. It is a good idea to consult your local chimney sweep to check the suitability of the chinmney and ensure there is adequate updraft and suggest any remedies to potential chimney problems. - Page 3 • Small, hot fires are more efficient than large slumbering fires. Most of the energy in burning wood is released as a bright flame. The turbulence in the flames creates good mixing between the combustion air and the gases that are released from the wood as it heats up.
- Page 4 The high temperature paint finish normally requires no treatment. Any damage or wear to small areas of the paint finish may be remedied using STOVEBRIGHT’s high temperature aerosol paint (colour ‘charcoal’, available from stove shops and from Firebelly). Make sure the stove is cold and read the instructions on the can carefully before applying the paint.
- Page 5 Installation Building regulations Installation of the Firebelly woodburning stove must comply with all local building regulations, including those referring to national and European standards. It is a good idea to consult your local chimney sweep to check the suitability of the chinmney and ensure there is adequate updraft and suggest any remedies to potential chimney problems.
- Page 6 Operational problems Blackened glass • The wood is too damp. Only use wood stored for at least 12 months under cover and with a moisture level not exceeding 20% RH. • Insufficient intake of air from the top air control. Open the top air control further. The air shield system is more efficient the more air is allowed to run over the glass panel.
- Page 7 Common Name Botanical Name Comments Grade Alder Alnus A low quality firewood Grade: 1 Needs to be seasoned well. Burns well with a pleasant smell Apple Malus and without sparking/spitting. Grade: 3 low water content (approx. 50%) and can be split very easily Fraxinus with an axe.
- Page 8 Warranty This stove has a two year guarantee covering any defects arising from faulty workmanship during normal use of the stove. The guarantee does not cover parts deemed to be replaceable in the normal usage of the stove. These include: Glass &...
Need help?
Do you have a question about the FB and is the answer not in the manual?
Questions and answers