Note: The charging status bar will not float if your battery is extensively consumed. To reduce power
consumption and energy waste, when battery is fully charged, disconnect your charger from the plug;
switch off Wi-Fi, GPS, Bluetooth or background-running applications when not in use; reduce the
backlight time, etc.
Activation and Service
Before using your phone, you must set up your service with Virgin Mobile. You will need your phone's
serial number (MEID), printed on a sticker inside the battery compartment.
Create Your Account and Pick Your Plan
Set up your Virgin Mobile account.
1. From your computer, visit
2. Choose an activation option and click Next. Then enter your zip code and click Next.
3. Your phone's MEID (serial number) is printed on the sticker located on the back of your phone in the
battery compartment. This number can also be found on the bottom panel of the phone's package.
4. Follow the remaining instructions to choose your plan and select a payment method.
5. Follow the activation instructions below and you'll be able to start using your phone.
Activate Your Phone
After setting up your account on virginmobileusa.com, simply turn your device on. Your device is
designed to activate automatically. If you are swapping from another Virgin Mobile device to a new one, be
sure to turn off the old device before swapping the serial number (MEID). Once the MEID swap is complete,
turn on the new device and the programming information will be pushed to your device automatically.
Manage Your Account
Access information about your account. You can:
Check your minutes
n
Add money (Top-Up)
n
Change plans
n
And more
n
From Your Computer
Log in with your wireless phone number and account PIN at virginmobileusa.com.
n
Get Started
virginmobileusa.com
and click Activate.
4