Table of Contents
Advertisement
Before making any connections to the switcher. Observe the following:
> Ensure the mains voltage supply matches the label on the
supplied plug-pack (+/- 10%)
> Ensure that the power switch is OFF
> Ensure that all system grounds (earth) are connected to a
common point.
> Avoid powering equipment within a system from multiple power
sources that may be separated by large distances
REMOTE CONTROL
qw
IR REMOTE CONTROL KEY :
w
SWITCH 1 POWER ON or OFF
Controller with a separate power ON and OFF
e
DESTINATION : 1 thru 8 OUTPUT SELECTION
Press the destination button to select the output display channel.
r
SOURCE : 1 thru 8 INPUT SOURCE SELECTION
Press input 1~8 sources with selection button
t
FUNCTION KEY
ALL - function selection button
OFF - function selection button
EDID - function selection button
RECALL - function selection button
MEMORY - function selection button
ENTER - function selection button
LOCK - function selection button
REMOTE CONTROL
> Connect all audio video sources and destination equipment
> Power up all source and destination audio-visual sources
> For each destination output select the appropriate input source
by using the front panel input 1~8 select buttons. The supplied
IR remote control. Or through the RS-232 serial communications
port.
> Upon power up the switcher will return to its last used setting
before powered down.
10
Advertisement
Table of Contents
