Y-harness, noting proper orientation. The servo ready to fly, this aircraft is for experienced RC pilots to allow you to get in the air quickly. Your T-28 Trojan 5. Slide the aileron leads inside the fuselage so that only and is not a toy! Misuse of the plane can cause leads are polarized to fit one way.
Step 3 Step 4 Installing the Landing Gear 3. Align the retaining screw with the flat spot on the Attaching the Horizontal Stabilizer Note: To make trim adjustments to the horizontal cowl. The retaining screw should be visible through stabilizer: 1.
To to the servos. If you intend to fly your T-28 Trojan PNP prepare for flight, you should first turn on your stock, then there is no need to program your ESC.
Page 5
FOR A PARTICULAR PURPOSE OF THE PRODUCT. could result in injury or damage to the Product or ParkZone T-28 Trojan PNP. It is ideal for you to fly at located approximately 2-1/2” behind the leading THE PURCHASER ACKNOWLEDGES THAT THEY other property.
Replacement Parts Make sure that you keep your T-28 Trojan PNP flying. Replacement parts are available at your local hobby shop or from Horizon Hobby (www.horizonhobby.com). Please try your local hobby shop first. By supporting them, they will be there when you need them!
Need help?
Do you have a question about the T-28 Trojan and is the answer not in the manual?
Questions and answers