Avermedia AverVision CP135 User Manual
Hide thumbs Also See for AverVision CP135:

Advertisement

F e d e r a l C o m m u n i c a t i o n s C o m m i s s i o n
S t a t e m e n t ( C l a s s A)
NOTE- This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by tuning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician
for help.
C l a s s A I T E :
Class A ITE is a category of all other ITE which satisfies the class A ITE
limits but not the class B ITE limits. Such equipment should not be
restricted in its sale but the following warning shall be included in the
instructions for use:
Warning - This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
C E C l a s s A ( E M C )
This product is herewith confirmed to comply with the
requirements set out in the Council Directives on the
Approximation of the laws of the Member States relating
to Electromagnetic Compatibility Directive 2004/108/EEC
Warning - This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures to correct this interference.
D I S C L AI M E R
No warranty or representation, either expressed or implied, is made with
respect to the contents of this documentation, its quality, performance,
merchantability, or fitness for a particular purpose. Information
presented in this documentation has been carefully checked for
reliability; however, no responsibility is assumed for inaccuracies. The
information contained in this documentation is subject to change without
notice.
In no event will AVerMedia be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability
to use this product or documentation, even if advised of the possibility of
such damages.
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AverVision CP135 and is the answer not in the manual?

Questions and answers

Summary of Contents for Avermedia AverVision CP135

  • Page 1 In no event will AVerMedia be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of...
  • Page 2 C O P Y R I G H T © 2009 by AVerMedia Information, Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form by any means without the written permission of AVerMedia INFORMATION, Inc.
  • Page 3: Table Of Contents

    LCD/DLP Projector ............. 7 Connecting a Computer ..........7 Connecting a Computer via USB ........ 8 Connecting to a Microscope ........8 Setting Up AVerVision CP135......9 Camera Head ............. 9 LED Light ..............9 Infrared Sensor ............9 Flexible Gooseneck and Arm ........10 Anti-glare Sheet ............
  • Page 4: Introduction

    AVerVision CP135. This document camera displays documents, negatives, transparencies and 3D objects onto a TV, LCD or DLP projector making presentations a snap. AVerVision CP135 is an ideal presentation tool for business, academic, medical and the scientific community. ® AVerMedia...
  • Page 5: Optional Accessories

    34mm Microscopic Adapter 28mm Microscopic Adapter Light Box...
  • Page 6: Avervision Cp135 Parts

    The illustrations below identify the parts of AVerVision CP135 Camera head LED light Camera lens LED light switch IR sensor Control panel Right panel Gooseneck Rear panel (10) Left panel (11) Label slot (10) (11) (12) DC 12V port Right Panel...
  • Page 7: Technical Specifications

    Image Sensor 1/2” Progressive Scan CMOS Pixel Count 3.2 mega pixels Frame Rate 24 fps (max.) White Balance Auto / Manual Exposure Auto / Manual Image mode Text / Graphics / High Frame Effect Color / B/W / Negative Analog RGB output HD 720P;...
  • Page 8: Making The Connections

    The ports on the rear, left and right panel of CP135 enable you to connect the unit to a computer, graphics display monitor or LCD/DLP projector, TV or other device. Illustrated below are the ports that are located at the rear, left and right panel of CP135 with their corresponding labels.
  • Page 9: Connecting The Power Adapter

    Connect the power adapter to a standard 100V~240V AC power source. Wall outlet Power adapter Locate the VIDEO, S-VIDEO or SCART RGB input port of the TV or Video equipment (i.e., VCR) to record your presentation on a videotape and connect it to S-VIDEO or VIDEO OUTPUT port of CP135. - For better video quality, we strongly suggest using S-VIDEO connection.
  • Page 10: Lcd/Dlp Projector

    Locate the RGB (VGA) input port of the graphics display device and connect it to RGB OUTPUT port of CP135. Make sure the TV/RGB switch is set to RGB. RGB cable LCD/DLP projector CRT monitor LCD monitor MAC monitor Locate the RGB (VGA) output port of the computer or laptop to display your PC presentation on screen and connect it to RGB INPUT port of CP135.
  • Page 11: Connecting A Computer Via Usb

    Locate the USB port of the computer or laptop and connect it to USB port of CP135. This enables you to use CP135 as a USB Camera and to transfer the captured images from the memory and to computer. Also see “Transfer Image from AVerVision CP135 to PC”. Computer USB cable...
  • Page 12: Setting Up Avervision Cp135

    This section provides useful tips on how to adjust the CP135 to meet your needs. The camera head can be turned 90° to the left and right. You can also manually adjust the focus from the focus ring to improve the quality of the pictures.
  • Page 13: Flexible Gooseneck And Arm

    The flexible gooseneck and arm design allows you to position the camera head from any angle. When positioning the camera head in upright position, press REVERSE on the remote control to rotate the image 180° . You may also rotate the image 180° in OSD menu. Just press MENU, select REVERSE in IMAGE menu list, and then press ENTER to turn on/off image reverse.
  • Page 14: Using The Infrared Remote Control

    Use the CP135 Remote Control to enhance your presentation by having the ability to switch between three (3) presentation modes and access various features. To use the remote control, first insert the batteries (2 “AAA” size batteries are provided) into the battery compartment at the back of the remote.
  • Page 15 Name Function (5) CAMERA/PC Switch between Camera and PC mode. - Camera mode displays the video signal from the built-in camera. - PC mode displays the video signal from the RGB INPUT port of CP135. (6) EXPOSURE Select to automatically or manually adjust the exposure.
  • Page 16 Name Function (10) PRESENTER - AVerBox overlays a frame on the presentation screen. Selecting SHADE changes the opacity of the area outside the box from 0%, 50% and 100%, COLOR to change the frame color from red, green and blue, and RESIZE to change the size of the frame.
  • Page 17 Name Function (12) AUTO IMAGE Automatically adjust and set the white balance and exposure setting. (13) FREEZE Toggle to pause or resume the camera. (14) REVERSE Rotate the image by 180°in Camera mode only. (15) TIMER Set/start/pause/resume the timer in TIMER menu. The timer will automatically count up after count down reaches zero to show the elapsed time.
  • Page 18: Touch Button Control Panel

    The touch button control panel located on the top side of the CP135 provides quick access to commonly used functions. (10) (11) (12) Function Description (1) POWER Turn the unit on/off. (2) Output LED Indicate the setting of the TV to RGB switch to which port Indicator the video signal is being sent out.
  • Page 19 Function Description (5) ENTER Make a selection in Playback mode and OSD menu. Use this to quick zoom to 200% or back to 100% in Camera mode only. (6) FREEZE Toggle to pause or resume the camera. (7) MENU Pull up and exit the OSD main-menu and sub-menu. (8) PLAYBACK View the captured image from the memory in 16-thumbnail images.
  • Page 20: Osd Navigation Tree

    There are 2 tab menus in CP135: IMAGE and SETTING tabs. For TV output, the RESOLUTION will be disabled in SETTING menu list. IMAGE MENU...
  • Page 21: Menu Functions

    SETTING MENU The MENU functions of CP135 enhance fine-tuning your screen display, set the timer, select OSD language and more. Press the MENU button to call up and exit from the main menu or sub-menu display. Use ◄or► to select between IMAGE and SETTING menu list. Then use ▲or▼...
  • Page 22 OSD Menu Description IMAGE > EFFECT EFFECT COLOR Use ▲or▼ to select and display the image in Camera B / W NEGATIVE mode into positive (true color), monochrome (black and white) or negative. Then press ENTER to make a selection. IMAGE >...
  • Page 23 OSD Menu Description CONTINUOUS to save successive still images until CAPTURE SINGLE the built-in memory is full or when the CAP/DEL CONTINUOUS IMG SIZE button is being press again to stop. In Continuous mode, press ENTER the bar will turn red, use ◄...
  • Page 24 OSD Menu Description SETTING > USB CONNECTION USB CONNECTION USB CAMERA Use ▲or▼ buttons to select the function of USB IMG DOWNLOAD between USB CAMERA and IMG DOWNLOAD. Then press ENTER. USB Camera - can be used as a computer webcam or with our bundled software to record video and capture still image.
  • Page 25: Transferring The Captured Image To Pc

    This enables you to transfer the captured image from the built-in memory to PC. The instruction below MUST be read and followed BEFORE connecting the USB cable. 1. MUST set the USB CONNECTION as IMG DOWNLOAD before connecting the USB cable. To set the USB CONNECTION as IMG DOWNLOAD, press MENU >...
  • Page 26: Limited Warranty

    You as the original purchaser. Except for the foregoing, the Product is provided “AS IS.” In no event does AVerMedia warrant that You will be able to operate the Product without problems or interruptions, or that the Product is suitable for your purposes.
  • Page 27: Limitation Of Liability

    Limitations of Warranty AVerMedia makes no warranties to any third party. You are responsible for all claims, damages, settlements, expenses, and attorneys’ fees with respect to claims made against You as a result of Your use or misuse of the Product. This warranty applies only if the Product is installed, operated, maintained, and used in accordance with AVerMedia specifications.

Table of Contents