Advertisement
Quick Links
ATTACHMENTS & ACCESSORIES
1. Hoof Polisher & Silver Polisher: Optional handpiece #504HP replaces clipper handpiece
on cable to allow for easy hoof sanding and polishing. Sanding disks are available in ne,
med and coarse. Cotton polishing wheel is available for leather and silver.
2. General purpose handpiece: Optional handpiece #503 replaces clipper handpiece on
cable to be used for sectioning teeth with diamond or carbide saw blades or grinding nails
and beaks.
3. Orthopedic handpiece: Optional handpiece #504 replaces clipper handpiece on cable
to allow for easy drilling and pinning during orthopedic procedures. Autoclavable. Accepts
bits and pins up to 5/32" diameter.
4. Dental attachment accessories: #101 polishing tips and #102 paste cups.
5. The Blade Caddy: #10362 for storage and cleaning of blades and accessories.
#584 - Hoof Polisher
Fine, Med, Coarse
#504 - Orthopedic
Handpiece
The Blade Caddy
#10362
8
#560 - Grinding
Stone
#503 - General
#504 - Orthopedic
Purpose
Handpiece
Handpiece
#101 - Polishing
Tip
#102 - Paste
Cups
TM
INSTRUCTION MANUAL
PLEASE READ ALL INSTRUCTIONS AND SAFETY
PRECAUTIONS BEFORE OPERATING PRODUCT!
SAVE FOR FUTURE REFERENCE; WARRANTY
PERTINENT CONTENT.
Product Speci cations:
Model - 401 Power Clipper
Belt-Mounted
Voltage: 115v
Amperage: .8
Wattage: 92
Horsepower: 1/12
9711 Mason Avenue, Chatsworth, CA 91311
(818) 772-2887 • (800) 821-9449 • fax: (818) 886-0218
www.DoubleKIndustries.com • info@DoubleKIndustries.com
Portable
Voltage: 115v
Amperage: .8
Wattage: 92
Horsepower: 1/12
7/8/13
Advertisement
Summary of Contents for Double K Industries 401 Power Clipper
- Page 1 Handpiece PLEASE READ ALL INSTRUCTIONS AND SAFETY PRECAUTIONS BEFORE OPERATING PRODUCT! SAVE FOR FUTURE REFERENCE; WARRANTY PERTINENT CONTENT. Product Speci cations: #101 - Polishing Model - 401 Power Clipper Belt-Mounted Portable Voltage: 115v Voltage: 115v Amperage: .8 Amperage: .8 Wattage: 92...
- Page 2 Do not attempt to perform any service or maintenance not outlined in this manual. Contact detaching handpieces.) Remove old cable by loosening the two Double K Industries or an authorized service center if additional service is required. allen set screws located in the nose portion of the motor housing, Check blades periodically for heat buildup &...
- Page 3 However, if the cutter Note: The 401 Power Clipper operates with a blade speed and range of motion that moves too freely, hair and debris could become jammed between blade parts, causing the blades to enables it to clip more e ectively than any clipper in its category.
- Page 4 Washer #8 SAE Flat Plated Adaptor 401-501 Housing Cable Modi ed Screw #8 x 3/8 Sht Metal PHP 855 Housing Plug Grommet Black 416-1 BMC Housing Assembly 20 62 401 Power Clipper Wiring Diagram Black Motor Speed Bridge Control Black...
Need help?
Do you have a question about the 401 Power Clipper and is the answer not in the manual?
Questions and answers