Somfy Rts - RFXCOM RFXtrx User Manual

12. Somfy RTS

Somfy RTS* devices can only be controlled by the RFXtrx433E. (not with the RFXtrx433)
The RFXtrx433E version is an RFXtrx433 with additional hardware to enable the RFY protocol
used to control Somfy RTS.
To pair the Somfy RTS device:
• Select a unique ID and unitcode for the RFXCOM RFY device.
• Disconnect power from all Somfy RTS devices except the device to pair.
• Press the Program button > 2 seconds on the original Somfy remote until the Somfy device
responds.
• Transmit a Program command with the RFXtrx433E. The Somfy RTS device should respond
indicating the pair command was successful.
The RFXCOM RFY remote is registered in the RFXtrx433E by sending a Program command.
Up to 30 RFXCOM RFY remotes can be registered in the RFXtrx433E.
Remotes can be erased from the RFXtrx433E using the RFXmngr program.
The Somfy RTS device can be controlled by any application as long as the same ID and Unit
Code are used.
For example if the RTS device is paired using RFXmngr with ID=1 02 03 and Unit Code 1, the
RTS device can be controlled with Homeseer using the same ID and unit code.
* Somfy RTS are registered trademarks of Somfy System, Inc.
Copyright 2011-2015, RFXCOM
RFXtrx Version 5.06 page 31 / 39