Omega SEAMASTER Caliber 9300 User Manual

Caliber
9300
232.92.46.51.03.001
V Co-Axial escapement
H Titanium
] Si14 silicon balance spring
l Automatic
U Chronometer
i Time zone function
o Sapphire crystal
t Anti-reflective treatment on both sides
D Sapphire crystal case back
d Screw-in crown
q Helium escape valve
B Liquidmetal®
F 4-year International Warranty
é Water-Resistant to a relative pressure of 60 bar
(600 metres/2000 feet)

WATCH FUNCTIONS

The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned against the
case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 60 hours or more, wind it
up with the crown in position 1.
2. Setting the time zone and correcting the date: pull the crown out to position
2. Turn the crown forwards or backwards, and the hour hand will move forwards
or backwards by 1-hour intervals. By passing the hour hand over midnight, the
date can be changed forwards or backwards. Push the crown back to position 1.
NB: when changing the time zone backwards, it is necessary to move the hour
hand back past 7 pm to ensure the date changes.
3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with a given time
signal.

CHRONOGRAPH FUNCTIONS

• Pusher A: start – stop, start – stop, etc.
Timing to 1/8 of a second for up to 12 hours.
• Pusher B: reset (after a stop).
SEAMASTER
PLANET OCEAN 600 M OMEGA CO-AXIAL CHRONOGRAPH 45.5 MM
Titanium on rubber strap
1 / 3