White Balance; Mounting The Pdp Bracket: Pdk-4005, With Pda-4001 And Pda-4002 Mounted - Pioneer PDP-V401 Technical Manual

Mounting standard metal fixtures (PDA-4001 • PDA-4002)

4.10.4 White balance

When the infrared reduction filter (PDA-4001) is mounted on the display, the tone may change. In this case, we
recommend that you adjust the white balance.
4.10.5 Mounting the PDP bracket (PDK-4005) with PDA-4001 and PDA-4002 mounted
To attach the PDP bracket (PDK-4005) with the PDA-4001 and PDA-4002 mounted, tighten along with the filter-supporting
metal fixture, as shown below.
Hexagonal socket head
button bolt (M8 x M18)
(supplied with the PDA-
4001 and 4002)
Hexagonal socket head
button bolt (M8 x M18)
(supplied with the PDA-
4001 and 4002)
In this case, use both the hexagonal socket-head button bolt (M8 x 18) and the washer supplied with the
PDA-4001 or PDA-4002. If the PDK-4005 is tightened using the hexagonal socket-head button bolt (M8 x
14) supplied with the PDK-4005, the screw is too short to provide sufficient strength. To ensure safe
Caution
operation, use the M8 x 18 bolt.
M8 wave washers
(supplied with the
PDK-4005)
Hexagonal socket head
button bolt (M8 x M18)
(supplied with the PDA-
4001 and 4002)
Hexagonal socket head
button bolt (M8 x M18)
(supplied with the PDA-
4001 and 4002)
95
<Ver. 2.1>