Redialing A Number; Dialing Numbers From The Electronic Notebook (Enb) - Siemens HiPath AllServe Operating Instructions Manual

Making Calls to Stored Destinations
Step by Step
Redial
Redial
Next?
Next?
Call?
A
or
DIAL
40

Redialing a Number

The last three external telephone numbers dialed are
stored automatically.
You can redial them simply by pressing a key.
The station number appears on your screen for two sec-
ond s and is then dialed.
Press the key once to dial the number last dialed.
Press the key twice to dial the next to the last number
d ialed.
Press the key three times to dial the third-to-the-last
number dialed .
Displaying and dialing saved station numbers
Press the key.
Press the "OK" dialog key within two seconds to confirm
your choice.
The next stored number is displayed . Press the "OK" di-
alog key to confirm four selection.
Select and confirm.
Dialing Numbers from the Electronic
Notebook (ENB)
Precondition: You have stored entries in the ENB on
your telephone Æ page 62.
Enter the name you want to find, or just the first few let-
B C
ters, using the alphanumeric keyboard . Each letter that
you enter limits the selection. The telephone d isplays
up to five located names at a time.
From the list of displayed names, select the one you
wish to call (the cursor appears as a black square at the
b eginning of the line).
Erase the entered letters one character at a time from
right to left.
The entry you wish to dial appears on the screen.
Press the key.
If this feature is configured (contact System Sup-
port), account codes entered are also saved
Æ page 45.