Page 1
DFG EC1000 Heavy Duty Coil Punch/Bind Machine Instruction Manual Provided By http://www.MyBinding.com http://www.MyBindingBlog.com...
Page 2
EC1000 – Heavy Duty Coil Punch and Power Coil Binding Machine Upper Mounted Electric Foot Pedal (Not shown) Punch Handle Power Roller Binding or Power switch High strength die cast metal Increases productivity and reduces Operated Coil Size Selector operator fatigue For professional appearance of all documents ll d...
Page 3
Warning: Do not connect this product to electrical power or attempt to operate it before you read these operating instructions and have been fully trained to operate this product. 1. Indoor use only. Do not expose to rain. 2. Keep hands, long hair, neckties, necklaces and other loose articles away from roller.
Page 4
Dear Customer, Thank you for purchasing Our EC1000 machine. The following are basic installation and operation instruction. For advanced punching and binding, please contact DFG. Installation Remove the blue knob from machine. Slide the punch handle on the exposed knob. Screw the blue knob back onto machine.
Page 5
How to Bind Books with Power Roller (up to 7/8”) 1. Manually turn the spiral coil into the first 4 or 5 holes 2. Press the foot pedal. Touch the coils against the moving roller to spin the coil through the book. (You can speed up binding by moving the book to the right side while the roller is spinning the coil through the book)
Page 6
3. Cut and crimp the ends of the spiral coil. Right handed A. Hold pliers with red dot up, with the coil near you. B. Place pliers with jaws inside the coil, near the center. C. Close the pliers to cut the coil and keep them closed D.
Page 7
How to Make Books Manually (any thickness) Manually turn your coil into the book. This is a very easy process. (Tip: It will be much easier to twist the front end of coils) Cut and crimp the coils (see #3 of power roller binding) How to Determine Appropriate Coil Size There are three ways you can choose an appropriate coil size:...
Need help?
Do you have a question about the DFG EC1000 and is the answer not in the manual?
Questions and answers