Enabling The Passenger Airbag - Ford Ranger Owner's Manual

Hide thumbs Also See for Ranger:
Table of Contents

Advertisement

Fitting the passenger airbag
deactivation switch
WARNING
If you need to fit a child restraint on
a seat protected by an operational
airbag in front of it, have a passenger
airbag deactivation switch fitted. Ask your
dealer for further information.
Note: The key switch is located in the glove
compartment with an airbag deactivation
lamp in the instrument panel.
If the airbag warning lamp illuminates or
flashes when you are driving, this indicates
a malfunction. Remove the child restraint
and have the system checked immediately.
Disabling the passenger airbag
A
Disabled
B
Enabled
Turn the switch to position A.
Ranger (TKE) Vehicles Built From: 03-12-2012, Vehicles Built Up To: 31-12-2013
Occupant protection
indicating that the passenger airbag is
disabled. For item location: See At a
Glance (page 9).

Enabling the passenger airbag

seat.
Turn the switch to position B.
indicating that the passenger airbag is
enabled. For item location: See At a
Glance (page 9).
27
When you switch the ignition on,
the passenger airbag OFF
warning lamp illuminates
WARNING
Make sure that the passenger airbag
is enabled when you are not using a
child restraint on the front passenger
When you switch the ignition on,
the passenger airbag ON
warning lamp illuminates

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ranger and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

2013 ranger

Table of Contents

Save PDF