Quick Sparkling; Lighting; Fridge; Energy Saver - Samsung SRF679SWLS User Manual

( 3 ) Quick Sparkling (Fill up (3 sec))
The Quick Sparkling button serves two
purposes:
- To produce the sparkling water rapidly.
- To active the Fill up function.
1) Quick Sparkling Function
When press the Quick Sparking button, the
Icon will turn on and produce the sparking
water rapidly.
Press the Quick Sparkling button to instantly
activate it if sparkling water is being produced.
If not, this option will be applied next time you
produce sparkling water.
The concentration of carbonic in the sparking
water will produce by 3 levels.
2) Fill Up Function
When replace the CO
'Quick Sparkling/Fill up (3 sec)' button for 3
seconds to active the Fill up function.
The water will fill in the sparkling water tank
and CO gas will inject to water for make the
2
sparkling water.
The sparkling water which is made by this
function can be produced differently depending
on the amount and concentration of the
remaining sparkling water in the tank.
If the resultant sparkling level by Fill Up is not
what you expected, select a desired sparkling
level and empty the sparkling water tank so that
the new setting is applied properly.
( 4 ) Fridge (Power Cool (3 sec))
The Fridge button serves two purposes:
- To set the Fridge to your desired
temperature.
- To turn the Power Cool function on and off.
1) To set the Fridge temperature, press the
Fridge button to set the refrigerator to the
temperature you want.
You can set the temperature between 7 °C
and 1 °C.
2) Power Cool function
Touch and hold this button for 3 seconds to
decrease the time needed to cool products in
the Refrigerator.
It can be helpful if you need to quickly cool
easily spoiled items or if the temperature in the
fridge has warmed dramatically (For example, if
the door was left open).
DA68-03022B (EN)-04.indd 31
cylinder, press the
2
English - 31
( 5 ) Lighting (ºC ↔ ºF (3 sec))
Lighting button serves two purposes:
- To turn the dispenser light on and off
- To switch the temperature units between ºC
and ºF
1) Light Function
Touching the Lighting button turns on the
Dispenser LED lamp in continuous mode so
that it stays on continuously.
The button also lights up.
If you want the Dispenser lamp to come on only
when someone uses the dispenser, press the
Lighting button to turn the continuous mode off.
2) To switch the temperature units between
ºC and ºF Touch and hold this button for 3
seconds to select the temperature display
you want.
Each time you press and hold the button, the
ºC and ºF temperature modes alternate and
the ºC and ºF icon lights up, indicating your
selection.
( 6 ) Energy Saver (Control Lock (3 sec))
Energy Saver button serves two purposes:
- To turn the Energy Saver mode on and off
- To turn the Control Lock function on and off.
1) Energy Saver Function
When you turn Energy Saver on, the Energy
Saver icon lights.
Turn Energy Saver off and the icon goes off.
The Energy Saver function's factory setting is
"ON".
If condensation or water drops appear on the
doors, turn the Energy Saver mode off.
2) Control Lock Function
Touch and hold this button for 3 seconds to
lock the display, the Flex Zone panel, and the
dispenser buttons so the buttons can not be
used.
When Control Lock is on, the refrigerator does
not dispense ice, water, or sparkling water,
even if the Dispenser Lever is pressed.
The Control Lock icon lights up to indicate
you've activated the Child Lock function.
Press 3 seconds to unlock.
14. 6. 23. 2:47