Table of Contents
Advertisement
Operating Your Dryer
To reduce the risk of fire and risk of lint collecting
in exhaust duct, do not operate dryer without lint
filter in place.
3. Add clothes loosely into dryer drum. Add fabric softener sheet,
if desired.
NOTE: To avoid damage to dryer, do not use more
than one fabric softener sheet per load.
4. Close loading door. Dryer will not operate with the door open.
10
DRY2025N_SVG
WARNING
DRY2032N_SVG
DRY2026N_SVG
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
5. Select Fabric Selector (available settings vary by model). Follow
garment manufacturer's care labels for recommended temper-
ature settings.
6. Select optional EXTEND TUMBLE (available on select models)
setting to continue tumbling items at no heat. This prevents
wrinkling when garments cannot be removed from the dryer im-
mediately. By pressing the EXTEND TUMBLE button to ON, the
AUTOMATIC REGULAR/DELICATE and AUTOMATIC PERMA-
NENT PRESS/KNITS cycles will tumble an additional 40 mi-
W771
nutes.
7. Select timer setting in cycle desired. These cycles control the
drying time.
The ENERGY SAVER settings, marked with an asterisk (*),
show which dryer settings will use the least energy and will
leave items damp for easier ironing.
8. Push timer knob in to start dryer.
NOTE: To stop dryer at any time, open the door or
turn timer knob to an OFF position. To restart dryer,
close door, reset timer if necessary, and push in the
timer knob.
End of Cycle Signal
The volume of the signal tone may be set on OFF, LOUD or between
the two selections. If a volume level is selected, the signal will let
you know when the cycle is done. The signal will stop when the door
is opened, or when the timer is advanced to an OFF position.
DRY2350N_SVG
NOTE: The signal will come on every 10 minutes when
the optional EXTEND TUMBLE setting is selected.
DRY2349N_SVG
DRY2029N_SVG
Part No. 513218R3
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Dryer and is the answer not in the manual?
Questions and answers
My dryer won’t signal when the cycle has ended. How do I get it turned on to do that?
To enable the end-of-cycle signal on a Speed Queen dryer, select a volume level (OFF, LOUD, or a setting between the two). The signal will notify you when the cycle is complete and will stop when the door is opened or the timer is advanced to an OFF position.
This answer is automatically generated
How do you male it beep when dryer is done on DR5 model
The Speed Queen dryer has an "End of Cycle Signal" feature. To enable the beep when the drying cycle is complete, set the signal volume to either "LOUD" or a level between "OFF" and "LOUD." The signal will sound when the cycle is done.
This answer is automatically generated