Omron FQ2-S Series User Manual page 310

Menu command
Insp. region
For- L.1 to L.4 Sets the character format for recogni-
mat
Camera setup
Charac-
ter color
Printing
type
Dot ver.
interval
Dot hor.
interval
Char.
thick. th.
Noise fil-
ter size
Bound-
ary cor-
rection
Rotation
compen-
sation
Slant
compen-
sation
Hyphen
height
upp. th.
Hyphen
height
low. th.
Slender
char. th.
Charac-
ter width
Charac-
ter height
Reading
mode
Continuous test Same as [Continuous test] on the [Test] Tab Page.
308
Menu Tables
Description
Moves the measurement region or
adjusts the size of the measurement
region.
tion.
Same as Camera adjustments on the Image Tab Page.
Sets the color of the characters to
detect.
Sets the type of printing of the charac-
ters to detect.
Adjusts the vertical dot interval of the
characters to detect. This parameter is
enabled only when [Printing type] is
set to [Dot character].
Adjusts the horizontal dot interval of
the characters to detect. This parame-
ter is enabled only when [Printing type]
is set to [Dot character].
Sets the thickness of the characters.
Negative numbers indicate thinner
characters. Positive numbers indicate
thicker characters.
Sets the size of the filter. Larger values
eliminate wide areas of noise. Small
values eliminate narrow areas of
noise.
Treats dark areas at the edges of the
measurement region as noise and
removes them from the read candi-
dates.
Turned ON when characters on the
workpiece are rotated because the
workpiece itself is rotated. Correction
is possible in a rotation range of ±15°.
Used when the characters are at a
slant. Correction is possible in a rota-
tion range of ±15°.
Sets the upper limit of the height of the
region to treat as a hyphen or other
symbol.
Sets the lower limit of the height of the
region to treat as a hyphen or other
symbol.
Sets the ratio of the height to the width
of the detection rectangle to judge as
thin characters (I, J, 1, :, and /).
Specify the width of the character to
be read.
Specify the height of the character to
be read.
If character strings with a variable
number of characters are to be read,
specify variable.
Setting range
---
32 alphanumeric characters
Black (default) or White
Solid character (default) or Dot charact-
ger
0 (default) to 30
0 (default) to 30
−255 to 255 (default: 0)
−60 to 440 (default: 0)
ON or OFF (default)
ON or OFF (default)
ON or OFF (default)
0 to 100 (default: 30)
0 to 100 (default: 70)
1 to 10 (default: 3)
0 to 9,999 (defaults: lower limit: 0, upper
limit: 9,999)
0 to 9,999 (defaults: lower limit: 0, upper
limit: 9,999)
Variable, fixed (default)
Data Refer-
ence
Scene p. 110
Scene p. 110
Scene p. 66
Scene p. 115
Scene
Scene
Scene
Scene
Scene
Scene
Scene
Scene
Scene
Scene
Scene
Scene
Scene
Scene
--- p. 228
FQ2-S/CH User's Manual