Rinse Programme Item; Reset Programme Item - Jura IMPRESSA XF50 Instructions For Use Manual

OFF AFTER
Press the Rotary Switch (1) to enter the OFF AFTER programme
item.
1 HRS
Turn the Rotary Switch (1) to set the number of hours after which
the machine is to switch off.
For example 2 HRS.
Press the Rotary Switch (1) to save the new automatic switch-off
time.
OK
OFF AFTER
Turn the Rotary Switch (1) until the following message appears on
the display.
EXIT
Press the Rotary Switch (1) again to exit programming mode.
READY

15.6 Rinse programme item

You can set whether the rinse should be started manually or
automatically when switching on.
READY
Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until RINSING appears on the display.
Press the Rotary Switch (1).
MANUAL
Turn the Rotary Switch (1) until the following message appears on
the display:
AUTOMATIC
Press the Rotary Switch (1) again to confirm the change.
OK
RINSING
Turn the Rotary Switch (1) until EXIT appears on the display.
Press the Rotary Switch (1) to exit programming mode.
READY

15.7 Reset programme item

In the RESET programme item you can reset various settings to
their factory settings:
PRODUCT
The settings (amount of water, strength, temperature) for any
product can be reset individually to the factory settings. The cor -
responding double product is reset to the factory settings at the
same time.
ALL PROD.
The settings (amount of water, strength, temperature) for all prod-
ucts are reset to the factory settings.
RESET ALL
All customer settings are reset to the factory settings. The
IMPRESSA then switches off.
E
21