Operation Procedure Of Diag Menu And Sub-Menu; Functions In Diag Mode; Initial Settings Used To Start Diag - Yamaha RX-V750 Service Manual

RX-V750/DSP-AX750/DSP-AX750SE
RX-V650/HTR-5760
Operation procedure of DIAG MENU and
SUB-MENU
There are 17 MENU items, each of which has some SUB-
MENU items.
DIAG menu selection
Select the menu using PROGRAM knob.
SUB-MENU selection
Select the sub-menu using w (Forward) and q (Reverse)
keys of PRESET/TUNING (LEVEL).
Rev erse

Functions in DIAG mode

In addition to the DIAG menu items, functions as listed
below are available.
• Input selection, Multi channel input
• Center/Surround/Surround Back/Sub-woofer level
adjustment
• Muting
• Speaker relay A/B
• Power on/off
• Master volume
* Functions related to the tuner and the set menu are not
available.
* It is possible to confirm Menu No.13 IF STATUS while
keeping the signal process (operation status) of each
DIAG menu by using the input mode key of the main
unit.

Initial settings used to start DIAG

The following initial settings are used when starting
DIAG. When DIAG is canceled, these settings are
restored to those before starting DIAG.
• Master volume: -20dB
• Input: DVD (MULTI CHANNEL INPUT OFF)
• Effect level: 0dB
• Audio mute: OFF
• Speaker relay A/B: ON
• Speaker setting: LARGE / BASS OUT = BOTH
• DIAG menu: DSP THR (1. YSS MARGIN)
30
DIAG menu selection
F orward
w
SUB-MENU selection
Reverse
DSP-AX750SE only
q
Forward