Instructions For Use; Check The Package Contents; Charging Your Tablet; Rechargeable Lithium-Ion Battery - Linx 10 Manual

Instructions for use

Check the package contents

The package contains:
- 1 x Linx 10 Tablet
- 1 x Mains Adapter
- 1 x Instruction Manual

Charging your tablet

Your battery has been partially charged at the
factory, but you may need to recharge it before you
can switch the tablet on for the first time.
Note: It is recommended to recharge the battrey of
the tablet fully before turning on for the first time.
Important: Use only the provided or approved
chargers with this tablet.
1. Plug the charger into a wall outlet
2. Connect the charger to your tablet via the Micro-B
Type USB connector port . The Power indicator LED
will light up when charging.
When the battery is full, disconnect the charger from
the tablet, then from the wall outlet.
Note: You don't need to charge the tablet for
specific length of time, and you can use the tablet
while it is chraging.
Note: Your tablet does not support USB charging.
Note: If teh battery is completely discharged, it may
take several minutes before the tablet can be used.

Rechargeable Lithium-Ion battery

Your tablet has an internal Lithium-ion polymer
battery which should last the lifetime of the product.
If you suspect that the battery is dead, try charging
it several times and follow the steps for charging
your tablet.
• Do NOT attempt to change the battery yourself.
• CAUTION: Danger of explosion if batteries are
incorrectly replaced.
• NEVER use or charge the battery if it appears to
be leaking, discoloured, deformed or in any way
abnormal.
• NEVER expose the battery to any liquid.
• NEVER expose the battery to excessive heat
such as direct sunlight or fire.
• NEVER throw batteries in a fire or attempt to
open the outer casing.
• Batteries are harmful if swallowed, so keep
away from and out of reach of infants and young
children.

Using your tablet

Turning your tablet On

To turn your tablet on, press and hold the Power/
Sleep button until the power indicator LED turns on
and the tablet will begin to power up.

Putting your tablet into Sleep mode

To put your tablet into Sleep mode, press the Power/
Sleep button once. The screen should switch off and
your tablet will be in Sleep mode.
To wake the tablet from Sleep mode, press the
Power/Sleep button once. The screen should wake
up and display the lock-screen.

Turning your tablet Off

To turn your tablet off, press and hold the Power/
Sleep button until you are promted with the 'Slide
to shut down your PC' message. Slide and drag
your finger down the screen to begin the shut down
process and turn off your tablet.
6