D. Maintenance Limitations Maintenance limitations on the KP500 must be performed only at the LGE or its authorized agents. The user may not make any changes and/or repairs expect as specifically noted in this manual.
Page 7
1. INTRODUCTION E. Notice of Radiated Emissions The KP500 complies with rules regarding radiation and radio frequency emission as defined by local regulatory agencies. In accordance with these agencies, you may be required to provide information such as the following to the end user.
3. TECHNICAL BRIEF 3.4 Power ON/OFF KP500 Power State : Defined 3cases as follow ] Power-ON : Power key detect (SM-Power’s ON port) ] Power-ON-charging : Charger detect. Figure 6 Power on application. Input ON is a power-on input for SM-POWER with 2 active high levels (see Figure 6). It might be triggered by a push button or by the RTCOUT output of the S-GOLD device as well.
3. TECHNICAL BRIEF 3.5 SIM & uSD interface KP500 supports 1.8V & 2.9V plug in SIM, SIM interface scheme is shown in (Figure 8). SIM_IO, SIM_CLK, SIM_RST ports are used to communicate with BBP(S-Gold3) and the SIM power supply enabled by PMIC.
Need help?
Do you have a question about the KP500 and is the answer not in the manual?
Questions and answers