Table of Contents
Advertisement
2.1
Updating the firmware
You can download the latest firmware of PEM-FDR at www.asus.com.
To update the firmware:
1.
Unzip or extract the firmware file then copy it into a bootable USB device.
2.
Go to the DOS prompt and key in the following command:
mst start
3.
Key in the following command:
mst status
Take note of the name of the device.
4.
Key in the following command:
flint -d [device name] -i [file name].bin -allow_psid_change -nofs
burn
2-2
Chapter 3: Driver installation
Advertisement
Table of Contents
