Loading Interval Conditions That Have Already Been Set - Epson Runsense SF-810 User Manual

SF-810 User Manual
Loading interval conditions that
have already been set
Operation buttons
Loading interval conditions
A
Display the measurement screen.
Press C on the time screen.
GPS positioning starts, and the measurement
screen is displayed once positioning is complete.
"Specifying a GPS (GPS Positioning)" on
U
page 30
B
Displays the Measure set. menu.
Hold down B on the measurement screen.
C
Select Mode.
Use C/D to select, and then press A.
Measure
D
Select Interval.
Use C/D to select, and then press A.
E
Select one of SETTING 01 to 03.
Use C/D to select the registered setting, and then
press A.
F
Check the set content.
Use C/D to scroll the screen.
Press A.
49