Nokia 3600 Slide Service Manual page 22

3: LCD repair using Display Adhesive Light
1) Remove the LCD as shown in disassembly
instruction. Remove the shaded area from UI Flex
Assy. Take care not to damage the UI Flex Assy
itself.
3) Remove the section foil by lifting the red tab to
expose the glued area.
22
Special Care Assembly must be used, unless entire UI
Flex is being replaced
2) Replace this section with Display Panel
Adhesive Light CC. This is necessary to ensure a
correct display fixation to the Slider Module and a
correct groundling of the display.
4) Align the display as shown.
Confidential
Copyright @ 2008 NOKIA. All rights reserved
3600 Slide RM-352
Service Manual Level 1&2
ISSUE 1