Collective Presetting Of Stations (Auto Preset); Channel Space Setting - Kenwood HM-353V Instruction Manual

24

Collective presetting of stations (Auto preset)

Main unit only
1
Receive a broadcast.
2
Select "AUTO PRESET".
menu
\
\
volume / multi control

Channel space setting

The space between radio channels has been set to the one that prevails in the area to which the system is shipped.
However, if the current channel space setting does not match the setting in the area where the system is to be used,
for instance when you move from area 1 or area 2 shown in the following table or vice versa, proper reception of AM/
FM broadcasts cannot be expected. In this case, change the channel space setting in accordance with your area by
referring to the following table.
Main unit only
1
Turn power on.
2
While holding TUNER FM/AM key pressed,
turn the volume/multi control knob to se-
lect "FM 50 kHz" or "FM 100 kHz".
TUNER
FM/AM
3 Set it.
set / demo
TUNER
FM/AM
set / demo
\
\
volume / multi control
A U T O P R E S E T
÷ A maximum of 30 stations of the band presently being
received will be preset.
÷ When there are many stations and the intended station
has not been preset, please also use "One-by-one pre-
setting (Manual preset)".
Each press switches the space frequency alter-
nately.
1 "FM 50 kHz" (FM 50 kHz, AM 9 kHz)
2 "FM 100 kHz" (FM 100 kHz, AM 10 kHz)
Area
USA, Canada and South
1
American countries
2
Other countries
Receiving broadcast station Playback of tape
CHANNEL
Space Frequency
FM: 100 kHz
AM: 10 kHz
FM: 50 kHz
AM: 9 kHz