Technical Data; Specifications - Hilti TE 25 Operating Instructions

1
2
3
4
5
Hilti TE 25 Rotary Hammer Drill
EG declaration of conformity
Designation: Rotary Hammer
Serial numbers: XX/0000001-9999999/XX
Model/type: TE 25
Year of design:1996
We declare under our sole responsibility
that this product is in conformity with the fol-
lowing standards or standardisation docu-
ments:
EN 50144, EN 55014 or EN 55011, EN
60555 according to the provisions of the
directives 73/23/EEC, 89/336/EEC,
89/392/EEC
Hilti Corporation
Martin A.C. Messner Dr. Heinrich Schäperkötter
Vice President D&ET Division Development Manager D&ET Division
11/1996 11/1996

Technical data

Input power:
Voltage (versions):
Input current:
Frequency:
Machine weight:
Speed under load:
Hammering under load:
Single impact energy:
Drill bits for concrete:
Recommended diameter range:
Drilling performace in medium-grade
concrete:
TE-CX/C drill bit
TE-C-S drill bit
TE-C-GB drill bit
TE-C-BK percussion core bit
TE-C-HB bit for concrete forms
Chuck type:
Automatic cut-out brushes
Double insulation, class II, CENELEC EN 50144
Radio and T.V. interference suppression as per EN 55014
Slip clutch for protection against overloading and accidents
Dust-tight enclosure; permanent lubrication (maintenance free)
Variable speed control switch
Ajustable side handle with depth gauge
Typically the A-weighted nois levels of the tool are:
– sound pressure level:
– sound power level:
Wear ear protection.
The typical weighted acceleration is 11 m/s
Right of technical modifications reserved
Do not use this product in any way other than as directed by these operating in-
structions.
The respective regulations of your trade association and the enclosed safet precau-
tions must be observed.
The operating instructions should always be kept with the machine!
830 W
100 V 110 V 120 V 220 V 230 V 240 V
8.7 A 7.9 A 7.2 A 3.9 A 3.8 A 3.6 A
50–60 Hz
4,9 kg
1 st speed 0–310 r.p.m.
2 nd speed 0–640 r.p.m.
0–3720 blows/min.
3.8 Joule
5–38.5 mm dia.
12–20 mm dia.
16 mm dia. = 60 cm 3 /min. = 300 mm/min.
5–17.5 mm dia.
8–28 mm dia.
")
30–38.5 mm (1 1 /
2
66–90 mm dia.
10–35 mm dia.
TE-C
89 dB (A)
102 dB (A)
2 .