Headphone Operation; Selecting The Inputs - Kenwood KRF-V7773D User Manual

How Do I Adjust the Sound?

Headphone Operation

Insert the headphone plug into the receiver's PHONES jack and adjust
the listening level.
STANDBY
ON/STANDBY
POWER
-ON –OFF
When listening through headphones, set SPEAKERS A and B to OFF.
26
VOLUME CONTROL

Selecting the Inputs

Selecting the Inputs
To select an input on the receiver:
Press one of the INPUT SELECTOR ¤/‹ keys. Each press changes the
input in the following order.
1 Tuner (frequency display)
2 CD1
3 MD/TAPE1
4 CD-R
5 VIDEO1
6 VIDEO2
7 VIDEO3
8 VIDEO4(VR-4090 only)
9 DVD
0 AV AUX
- PHONO
(VR-4080/KF-V7773D only)
Although VIDEO4 is displayed in the initial status, the receiver cannot be
switched to select VIDEO4. The VIDEO4 display will not appear after
Remote Control unit has been set up.
To select an input on Remote Control unit:
The TV-monitored device, video device and audio device can be selected
using separate keys.
Audio device Video device
MOVIE
MUSIC
1 CD1 1 VIDEO1
2 MD/TAPE1 2 VIDEO2
3 Tuner 3 VIDEO3
4 CD-R 4 VIDEO4
5 PHONO 5 DVD
6 AV AUX
If any of the above If any of the above
inputs is not inputs is not
identified, the next identified, the next
device name will be device name will be
displayed. displayed.
¤ INPUT SELECTOR ‹
To return to the previously dis-
played input, press the other
key.
TV key
TV
1 TV1
2 TV2
3 CABLE
The TV key cannot
select the input.
It can be used to
remote control TV1,
TV2 or CABLE if ,
devices are
identified at these
inputs.
27