Table of Contents
Advertisement
Installation and connection
The water protection system
The Miele water protection system pro‐
tects all parts of the washing machine
from water damage.
The system consists of three main
components:
– the inlet hose
– the electronic unit and drainage and
overflow protection
– the drain hose
Inlet hose
– Protection against bursting
The inlet hose is tested to withstand
pressure of at least 7,000 kPa.
56
Electronic unit and washing machine
housing
– Sump
Any leaking water is collected in a
sump in the base of the machine. A
float switches off the water inlet
valves, preventing any more water
from flowing into the machine and
water in the suds container is pum‐
ped away.
– Overflow protection
This prevents the washing machine
taking in too much water. If the water
level exceeds a certain level, the
drain pump switches in and pumps
the excess water away.
Drain hose
The drain hose is protected by a venti‐
lation system which prevents the wash‐
ing machine from being emptied com‐
pletely.
Hide quick links:
Advertisement
Table of Contents
