Changing The Function Of The Airways Indicator - Miele TDA 150 Operating Instructions Manual

Programmable functions
Changing the function of the
airways indicator
Fluff should be removed after drying.
The Clean out airways indicator light
will remind you to clean the filters
when a certain amount of fluff has
collected in them. You can decide at
what level of fluff this reminder should
be given.
You will have an idea of which option to
select after a few drying programmes.
Certain faults can also cause this
indicator light to come on at other
times.
Follow steps (,, ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is pointing
to Finish.
 Press Start and keep it pressed in
whilst carrying out steps -.
 Switch the dryer on.
 Wait until the indicator light for the
Start button lights up constantly . . .
 . . . and then release the Start
button.
 Turn the programme selector
to Woollens.
The Empty container indicator light will
flash slowly once.
56
The option selected will be displayed
by a number which will alternate with
.
 The Clean out airways indicator
light is deactivated
 The Clean out airways indicator
light only comes on when there is
a heavy build-up of fluff
(The Clean out airways indicator light
will also flash once)
 Factory default setting
(The Clean out airways indicator light
will also flash twice)
 The Clean out airways indicator
light comes on when there is a
slight build-up of fluff
(The Clean out airways indicator light
will also flash three times)
 Pressing the Start button switches
between the options.
 Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
 Carry out steps -.
 Switch the dryer off after checking.