Nokia Observation camera Support Manual page 10

Figure 11. Monitor window.
Note: Connection settings need to be modified only when the Observation
Camera is taken in to use for the first time.
After these basic settings the camera is ready for use. Now go to
Write. It is also a good idea to save the camera settings to your computer's hard disk for later
use or if you want to configure several cameras with the same settings.
Disconnect the power cord and the data cable from camera and close the back lid.
The settings are saved in camera's non-volatile memory.
Now you can install your camera and check the functionality and aiming. Send SMS "1"
(without quotation marks) to your camera and your camera should send you a picture via
MMS or e-mail depending on your camera settings.
and click on
8/9