Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kenwood KMF-X9000
Summary of Contents for Kenwood KMF-X9000
- Page 1 KMF-X9000 POWER AMPLIFIER INSTRUCTION MANUAL B60-5097-08 01 KO (Y,E) 0103...
-
Page 2: Table Of Contents
Introduction Thank you for selecting our power amplifier as part of your high-fidelity system. We at KENWOOD are confident that your choice will bring you years of rich listening pleasure. Please take the time to read through this booklet carefully. It will help you to obtain the peak performance your power amplifier can deliver. -
Page 3: Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immedi- ately. -
Page 4: 2-Channel Stereo Configuration
* In the case of 2 Ω In the case of 6 Ω * If you connect more than one pair of speakers to the KMF-X9000, move the 2Ω (STEREO)/6Ω OVER (THX) switch to the 2Ω (STEREO) position. The amplifier’s performance is not THX... -
Page 5: Mono (Bridged, Or Btl) Configuration
Mono (bridged, or BTL) configuration In this configuration, the KMF-X9000’s two individual channels operate together to drive a single speaker (such as a subwoofer) in mono. This allows the amplifier to deliver more than double the power of one of its channels to the speaker. -
Page 6: 2-Channel Mono Configuration
2-Channel mono configuration In this configuration you can connect 2 speakers (such as 2 subwoofers) to the KMF-X9000 and send a single preamp signal (such as a mono subwoofer output) to both speakers without using a Y-adapter. The amplifier delivers its rated stereo power output to each speaker. -
Page 7: Controls And Indicators
*: The STANDBY indicator is activated only when the supplied mini-plug cord is connected between this unit and the KENWOOD receiver (such as the Kenwood KRF-X9995D receiver). The STANDBY indicator will light when the KENWOOD receiver is turned OFF and it will go out when the KENWOOD receiver is turned ON. -
Page 8: Specifications
... 128 mm (5-1/32") ... 385 mm (15-5/32") Weight (net ) ... 12.3 kg (27.2 Ib) • KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. • Manufactured under license from Lucasfilm Ltd. Lucasfilm and THX are trademarks or registered trademarks of Lucasfilm Ltd.