Description Of Dryers Pt 8251, 8331, 8401 - Miele PT 8251 + COP Operating Instructions Manual

Description of dryers PT 8251, 8331, 8401

Control panel PT 8251, 8331, 8401 Profitronic B Timed programmes
3
1 Segment display - Time
4 Venting system fault indicator
7 Time selection rotary control
Mains On/Off switch s
Switches the machine on or off.
Temperature selection button
For setting the required drying temperature - Cold,
Low, Medium, High. The corresponding LED will
light up.
Time selection rotary dial u
Programme durations of up to 60 minutes can be
selected in five minute stages from 5 to 60 minutes to
suit different fabric types and depending on how the
laundry is to be further processed. The
corresponding LED will light up. The drying duration
can also be altered during the drying process.
START/STOP button
Press the Start/Stop button to start or stop the drying
programme.
8
1 2
4 5 6
2 Programme sequence display
5 Fluff filter fault indicator
8 On/Off switch
7
3 Temperature selection button
6 START/STOP button
Segment display
Before the start of a programme this shows the
selected drying duration in minutes.
After the start of a programme it shows the time left to
the end of the programme.
It also shows fault messages, see "Problem solving
guide".
It can also show h for "Peak load cut-out" (optional).
Programme sequence display
The programme sequence is displayed in three
stages. The stage the programme is at will be
highlighted in yellow.
!
Drying
L
Cooling down
O
Programme finished / Anti-crease
Check venting system 0 fault indicator
This will light up if there is a problem with the venting
system.
Clean the fluff filter W fault indicator
This light up when the fluff filter needs to be cleaned.
8