Related Manuals for Wine Enthusiast N'finity Pro
Summary of Contents for Wine Enthusiast N'finity Pro
- Page 1 N’FINITY PRO BEVERAGE CENTER INSTRUCTION MANUAL PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING AND OPERATING.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Contents ____________________Page # Beverage Center Package Contents Important Safety & Pre-Use Instructions Installation Instructions (a) General Installation Instructions (b) Installation of Built-In Unit Operating Your Beverage Center Temperature Settings Removing the Rolling Shelf Care & Maintenance Troubleshooting Guide Technical Information Warranty Information... -
Page 3: Beverage Center Package Contents
Beverage center Package Contents • Instruction manual • 6 wine shelves, 4 beverage shelves • 2 keys IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when WARNING using your appliance, follow these basic precautions: Read all instructions before using the beverage center. -
Page 4: (B) Installation Of Built-In Unit
Built-In Installation The cutout dimension illustrated in figure (A) allows for door swing and access to the pull-out shelves when installed as a built-in appliance. If installing between frameless cabinets, a ½” wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing. -
Page 5: Temperature Settings
Beverage Storage Compartment Controls LOCK: Press the lock button for 3 seconds to unlock the control panel. After 15 seconds of inactivity, the control panel will lock automatically. UP/DOWN: Increases or decreases temperature by 1 degree. C/F: Press both buttons simultaneously for 3 seconds to change the temperature reading to Fahrenheit or Celsius. -
Page 6: Removing The Rolling Shelf
REMOVING THE ROLLING SHELF To remove a rolling shelf: Remove all bottles. Pull the shelf out as far as it will go. Push the left side lever upwards while pushing the right side lever downwards (as illustrated below). Remove the shelf. CARE AND MAINTENANCE Cleaning Your Beverage center. -
Page 7: Troubleshooting Guide
Moving Your Beverage center Remove all items. Securely tape down all loose items (shelves) inside your appliance. Turn the adjustable leg up to the base to avoid damage. Tape the door shut. Be sure the appliance stays secure in the upright position during transportation. Also protect the outside of the appliance with a blanket or similar item. -
Page 8: Technical Information
Range of inside cabinet humidity 60% RH WARRANTY INFORMATION Please speak to your retailer before calling Wine Enthusiast if you did not purchase your beverage center directly from Wine Enthusiast. LIMITED WARRANTY Length of Warranty: This Limited Warranty lasts for one (1) year from date of receipt of purchase of the wine cellar (“Limited Warranty Period”). - Page 9 Limited Warranty Period. If Wine Enthusiast deems the wine cellar is not repairable, Wine Enthusiast will use the value of your original order toward a replacement; provided, however, that the purchaser will be responsible for all shipping and handling costs with respect to the replacement after the initial ninety (90) days after the date of receipt of original purchase.
Need help?
Do you have a question about the N'finity Pro and is the answer not in the manual?
Questions and answers
I cannot read the temperatures anymore. Not all lights on the panel numbers light up. Can this be fixed?
Yes, if the temperature display is not showing the correct unit (Fahrenheit or Celsius), you can change it by pressing both the UP and DOWN buttons simultaneously for 3 seconds. If the display is completely off, check if the unit is in full stealth mode, where no lighting or readout appears. If the issue persists, consulting a certified electrician or an authorized product service center is recommended.
This answer is automatically generated