To Recall A Memorised Station; To Scan The Preset Stations; To Erase Entire Preset Memory; Listening To The Dab - Pioneer X-SMC00 Operating Instructions Manual

Slim micro system
Hide thumbs Also See for X-SMC00:
Table of Contents

Advertisement

Using the tuner

To recall a memorised station

1
Press PRESET +/– to select the desired
station.

To scan the preset stations

The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1
Press and hold PRESET +/–.
The preset number will appear and the programmed stations
will be tuned in sequentially, for 5 seconds each.
2
Press PRESET +/– again when the desired
station is located.

To erase entire preset memory

1
Press TUNER on the remote control.
2
Press CLEAR until "MEM CLR" appears.
Note
• All stations will be erased.

Listening to the DAB+

About DAB+ (Digital Audio
Broadcasting)
Digital Audio Broadcasting is a digital transmission system
where audio signals are converted to digital signals for
broadcasting. DAB+ is broadcast as a group of data called
multiplex (ensemble) which may contain one or more stations
(services). Each station contains a primary service and there
may be one or more secondary services. This allows several
programmes or services to be transmitted on a single
frequency.
DAB + SIGNAL
MULTIPLEX
(ENSEMBLE)

Auto Scan

When turned on for the first time, the unit scans radio
stations automatically to create a station list. You can make
the auto scan again when you move the unit to other areas or
add multiplex channels to the station list.
1
display.
2
more than 3 seconds.
Auto Scan scanning begins.
After the scan:
The stations will be stored in alphanumeric order and the first
station on the list will be selected and you will hear it through
the speakers.

Selecting a station in the station list

Once a DAB+ station is received, you can select stations in
the station list.
1
display.
SERVICES
2
TUNE +/– to select the desired station.
SERVICES
3
COMPONENTS
the remote control to tune into the desired
(STATIONS)
station.
DISPLAY
TUNE+
ENTER
MENU
PRESET
TUNE–
+
MUTE
DIMMER
DAB
ST/MONO
SCAN ENTER
Press the TUNER until "DAB" appears on the
Press DAB SCAN on the remote control for
• To listen to other stations, see Selecting a station in the
station list below.
Note
• If no station is found, "NO SIG" appears.
• Up to 100 appears for total received stations.
Press the TUNER until "DAB" appears on the
Whilst receiving a DAB+ station, press the
Within 10 seconds, press the DAB ENTER on
FOLDER
MEMORY
/PROGRAM
VOLUME
+

DISPLAY
08
25
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

X-smc00dab-wX-smc00dab

Table of Contents