Setting The Temporary Skip Function - Icom ID-5100A Full Manual

Previous view
4
SCAN OPERATION

Setting the temporary skip function

This function temporarily skips up to five unwanted fre-
quencies during a scan, for the set time period.
This function enables you to temporarily skip the un-
wanted frequencies without the skip frequency setting.
Start the scan. (p. 4-5)
q
• When a signal is received, the scan pauses.
While the scan is paused, and if you want to skip the
w
frequency, touch [QUICK].
Touch "Temporary Skip."
e
Temporary skip function is set.
• The
After setting the temporary skip function, the scan
r
resumes.
• The frequency will be skipped for the Temporary Skip
time period.
• After the Temporary Skip time period passes, or the scan
is cancelled, the Temporary Skip is also cancelled.
The Temporary Skip time period is set to "5 minutes"
by default.
You can change the setting in the Menu screen.
(Scan > Temporary Skip Timer)
For your reference:
• Up to five Temporary Skip frequencies or memories
can be set.
When the 6th frequency or memory is set, the mes-
sage window appears, and the oldest frequency or
memory is automatically deleted.
• During Memory or DR scanning, follow steps w and
e to skip the channel for the set time period (De-
fault: 5 minutes).
• The Temporary Skip time period is set to "5 minutes"
by default.
You can change the setting in the Menu screen.
(Scan > Temporary Skip Timer)
4-11