Advertisement
Quick Links
Advertisement
Related Manuals for Dension DAB+P
Summary of Contents for Dension DAB+P
- Page 1 DAB+P Smart DAB Radio Receiver Quick Start Guide v.1.1 DBP-9201-2...
- Page 2 INTRODUCTION The Dension DAB+P device is a universal solution for listening to your favorite DAB (Digital Audio Broadcast) stations everywhere you want (car, home, offi ce and many more). This device gives you an outstanding user experience displaying full DAB information (metadata) on your smartphone’s display using the free ‘Dension DAB+P Controller’...
- Page 3 DAB+P connectors Front view Back view DAB (Digital Audio Broadcast) is an international standard for digital radio broadcasts. The availability of DAB stations and broadcast coverage are very much location and country specifi c. Please consult your local broadcast information for...
-
Page 4: Device Installation
(FM or AUX). Temporary installation: Use the cigar lighter power connection if you don’t want to install the DAB+P so that it could be removed easily later. Please note: If your cigar lighter connection provides continuous power, it is recommended to disconnect the DAB+P device each time when not in use to avoid battery discharge. - Page 5 • The DAB module supports both amplifi ed and non-amplifi ed aerials. For amplifi ed antennas 12V power is provided by the DAB+P receiver via the 2 pin molex connector Read the manual of the antenna used carefully and follow the instructions in order to fi...
- Page 6 Please turn the ignition ON (if switched power is used) and check the status indicator LED on the DAB+P. The steady light means that the DAB+P receives electric power. If the LED does not light up when the device is connected please check the power connection.
- Page 7 Bluetooth device(s), using HFP or A2DP protocol (e.g. a hands free kit). If you are using the DAB+P device over AUX, please go to the next chapter (Operation). After BT pairing, when used in FM mode, you need to set the FM frequency. In order to have the best FM transmission quality, search for a free frequency on your radio fi...
-
Page 8: Operation
Set the FM region upon fi rst use: • Tap on option ‘US’ if FCC regulation is applied • Tap on option ‘EU‘ if CE regulation is applied Please note: Free FM frequencies are location dependent, therefore you might need to change the FM-settings again if traveling extensively. OPERATION First you need to perform a DAB scan to fi... - Page 9 You can browse in the ‘All stations’ list by swiping up and down. You can select a DAB station by tapping on it. During playback the station name and metadata (if available) will be displayed in the application. Playback screen When playback mode is active the following options are available: Previous channel: Pause playback:...
- Page 10 Favourites All previously added favourite channels can be reached from the main menu if you tap on the presets icon. In order to remove an item from the list, just tap on the ‘Star’ icon. Currently unavailable stations appear in the presets list as well, but are marked as unavailable using grey letters.
- Page 11 Android’ to be displayed in the Bluetooth connection menu on your iPhone. In this case connect to the ‘DAB+P Android’ as described above, it will not infl uence operation and the name will be refreshed to ‘DAB+P iOS’ next time automatically.
- Page 12 List of your favourite stations Bluetooth, FM or update options Please note: Although your phone is connected to the DAB+P over Bluetooth, you can still connect to any Bluetooth device(s), using HFP or A2DP protocol (e.g. a hands free kit).
- Page 13 If you are using the DAB+P device over AUX, please go to the next chapter (Operation). After BT pairing, when used in FM mode, you need to set the FM frequency. In order to have the best FM transmission quality, search for a free frequency on your radio fi...
- Page 14 The scanning procedure usually takes 20 seconds (within this time you can see a progress bar on the phone’s screen). When it is fi nished, all available stations will be listed and the fi rst available station starts to play automatically. When it is fi...
- Page 15 Playback screen When playback mode is active the following options are available: Previous channel: Pause playback: to select the previous station to stop the playback or if you want to use the ‘External AUX’ option Favourites: Next channel: to add this channel to your select the upcoming station favourites Important notes:...
-
Page 16: Disclaimer And Warranty
The use of handheld devices while driving may be subject to government legislation. Please ensure that your use of the Dension device complies with applicable traffi c laws. Dension does not assume liability for any events resulting from the illegal or irresponsible use of handheld devices while driving. - Page 17 For warranty claims, proof of purchase is required UPDATE AND SUPPORT Please check the settings section in the ‘Dension DAB+P’ App for the latest fi rmware version and our website for product documentation as these may provide additional features or easier use of the product.
Need help?
Do you have a question about the DAB+P and is the answer not in the manual?
Questions and answers