Adjusting The Aux Input Level - Kenwood HM-331 Instruction Manual

Adjusting the AUX Input Level

This adjusts the input level for the external equipment (video deck etc.) connected to the AUX input
terminal. Adjust so that the volume of the AUX input source sounds at an equivalent level to the CD .
(Main unit operation only)
1
Select AUX (external input).
1 Select AUX (external input).
2 2
2 Play the connected equipment.
2
Select "AUX LEVEL ?".
2 2
(Press the "set/demo" key while
2 2
the "?" mark is blinking.)
3
Adjust.
1 Adjust the input level.
2 2
The level
decreases.
2 Set it
2 2
AUX
VOLUME / multi control
menu
set/demo
VOLUME / multi control
The level
increases.
set/demo
Turning the knob switches the function as shown
in the character information display.
TAPE RVS.
O.T.E.
A. MEMORY (or A. PRESET) ?
(Only when the TUNER input is selected)
AUX LEVEL
(Only when the AUX input is selected)
BALANCE
TIMER SET
A.P.S. SET
8 0 1 8 0 0 1 2
PM
I N P U T C
Set level (display for about 5 sec)
÷ Adjust the input level while "INPUT" is displayed.
÷ Adjustment is possible over the range from -6 to +3.
Tone adjustment
HM-331 (En/T)
?
?
?
?
?
?
N
MHz BEST HITS O.T.E.
+ 2 • • •
TITLE
MD ED
37